ADG812YRU-REEL
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | TIN LEAD |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| -3db Bandwidth | 90MHz |
| On-State Resistance (Max) | 650mOhm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 67 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 30pF 35pF |
| On-state Resistance Match-Nom | 0.04Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 25ns, 5ns |
| Charge Injection | 30pC |
| Channel-to-Channel Matching (ΔRon) | 40m Ω |
| Crosstalk | -90dB @ 100kHz |
| Switch-on Time-Max | 30ns |
| Switch-off Time-Max | 8ns |
| Voltage - Supply, Single (V+) | 1.65V~3.6V |
| Height Seated (Max) | 1.2mm |
| Length | 5mm |
| RoHS Status | Non-RoHS Compliant |
ADG812YRU-REEL Overview
The electrical component comes in 16-TSSOP (0.173, 4.40mm Width) packaging, which makes it convenient to ship overseas. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have the same number of circuits 1:1. Extended operating temperature around -40°C~125°C TA. In total, 16 terminations have occurred. High-quality output is provided by the electronic component's 1 channels. With a 2.5V voltage supply, the electrical component should be turned on and run. The electronic part body is injected with 16 pins. Multiplexers built on a SPST - NO switching circuit are built. This multiplexer is composed of 4 circuits. This analogue multiplexer requires a voltage of 1.65V~3.6V when it drains from a single voltage supply.
ADG812YRU-REEL Features
1 Channels
Switch Circuit: SPST - NO
-3db Bandwidth: 90MHz
ADG812YRU-REEL Applications
There are a lot of Rochester Electronics, LLC ADG812YRU-REEL Analog Switches & Multiplexers ICs applications.
- Transmit
- PBX interfaces
- Digital cross connects (DSX-1)
- Video signal routing
- Audio and video signal routing
- FTTH
- Ultrasound
- Microprocessor Controlled Analog Systems
- Communication systems
- Modems
