ADG812YRUZ

25ns, 5ns SPST - NO 650mOhm DUAL Analog Switches BREAK-BEFORE-MAKE ADG812 16 Pins 1nA 2.5V 16-TSSOP (0.173, 4.40mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG812YRUZ
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 258
Description: 25ns, 5ns SPST - NO 650mOhm DUAL Analog Switches BREAK-BEFORE-MAKE ADG812 16 Pins 1nA 2.5V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 1 month ago)
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~125°C TA
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	650mOhm
Subcategory	Multiplexer or Switches
Max Power Dissipation	14.4μW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Number of Functions	4
Supply Voltage	2.5V
Base Part Number	ADG812
Pin Count	16
Operating Supply Voltage	3V
Polarity	Non-Inverting
Number of Channels	4
Interface	Parallel
Max Supply Voltage	3.6V
Min Supply Voltage	1.65V
Test Frequency	100kHz
Nominal Supply Current	4μA
Power Dissipation	14.4μW
Max Supply Current	4μA
Throw Configuration	SPST
Turn On Delay Time	25 ns
Supply Type	Single
Bandwidth	90MHz
Turn-Off Delay Time	5 ns
On-State Resistance (Max)	650mOhm
High Level Output Current	300mA
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	67 dB
Current - Leakage (IS(off)) (Max)	1nA
Channel Capacitance (CS(off), CD(off))	30pF 35pF
On-state Resistance Match-Nom	0.04Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	25ns, 5ns
Insertion Loss (dB)	0.05 dB
Charge Injection	30pC
Channel-to-Channel Matching (ΔRon)	40m Ω
Crosstalk	-90dB @ 100kHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	30ns
Switch-off Time-Max	8ns
Voltage - Supply, Single (V+)	1.65V~3.6V
Normal Position	NO
Height	1.05mm
Length	5mm
Width	4.4mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG812YRUZ Overview

Due to its 16-TSSOP (0.173, 4.40mm Width) packaging, the electronic part is convenient for international shipping. Advanced packaging method Tube is used to provide high reliability. Surface Mount is where this multiplexer is located. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Operating temperature extended to -40°C~125°C TA. Total terminations are 16. The electronic part provides high-quality output because it has 4 channels. In the case of a voltage supply of 2.5V volts, the electrical part can be powered up and run. A total of 16 pins are injected into the body of the electronic part. Unlike digital switches, these are based on SPST - NO switching circuits. Try searching with ADG812 to find analog multiplexer variants. As far as internal resistance is concerned, it has 650mOhm. For functions related to 16 pins, please refer to the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 3.6V to the switch device in normal circumstances. Analog switch ics with Single supply type are cost-effective. 1.65V is the lowest voltage that should be fed to the electronic electronic part. This analogue multiplexer requires a voltage of 1.65V~3.6V when it drains from a single voltage supply. It may damage the digital multiplexer if the voltage is higher than 4μA. 3V operating voltages can be used with this electrical part. 90MHz-bandwidths can be used to transfer data between multiplexers.