ADG812YRUZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Supplier Device Package | 16-TSSOP |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 650mOhm |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 14.4μW |
| Base Part Number | ADG812 |
| Number of Outputs | 4 |
| Operating Supply Voltage | 3V |
| Polarity | Non-Inverting |
| Number of Channels | 4 |
| Interface | Parallel |
| Number of Circuits | 4 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.65V |
| Test Frequency | 100kHz |
| Operating Supply Current | 3nA |
| Power Dissipation | 14.4μW |
| Max Supply Current | 4μA |
| Number of Bits | 4 |
| Throw Configuration | SPST |
| Turn On Delay Time | 25 ns |
| Number of Inputs | 4 |
| Supply Type | Single |
| Bandwidth | 90MHz |
| Turn-Off Delay Time | 5 ns |
| -3db Bandwidth | 90MHz |
| On-State Resistance (Max) | 650mOhm |
| High Level Output Current | 300mA |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 30pF 35pF |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 25ns, 5ns |
| Insertion Loss (dB) | 0.05 dB |
| Charge Injection | 30pC |
| Channel-to-Channel Matching (ΔRon) | 40mOhm |
| Crosstalk | -90dB @ 100kHz |
| Voltage - Supply, Single (V+) | 1.65V~3.6V |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG812YRUZ-REEL7 Overview
The electronic component is convenient to ship overseas because it is packed in a 16-TSSOP (0.173, 4.40mm Width). High reliability is achieved by using advanced packaging method Tape & Reel (TR). Mounted in Surface Mount is this multiplexer. Multiplexers and demultiplexers have a number of circuits 1:1. Operating temperature around -40°C~125°C TA extended. This electronic part offers high-quality output due to its 4 channels. A SPST - NO switching circuit is used for these analog switches. Circuits number 4 make up this analogue multiplexer. Try searching with ADG812 if you're looking for variants. The internal resistance of this digital multiplexer is 650mOhm. You can find the functions of the 16 pins in the datasheets. Users should never supply a voltage higher than 3.6V to a switch device. An effective Single supply digital multiplexer. It is recommended to use 1.65V as the lowest voltage for the electrical part. 3nA current would be enough for this multiplexer to operate. Using a single voltage supply, this switch device consumes 1.65V~3.6V volts. If put voltage greater than 4μA on the device, damage may be caused to the analogue multiplexer. 3V operating voltages are supported by the electronic component. Operating the 4 inputs requires 4 inputs. There are various bandwidths available for data transfer. Temperatures above 125°C degrees Celsius should not be operated by the multiplexer. A analog switch ics with 4 outputs is included. Suppliers offer 16-TSSOP packages. The switch device is capable of conducting in a 4-bit mode.
ADG812YRUZ-REEL7 Features
4 Channels
Switch Circuit: SPST - NO
3nA Supply Current
-3db Bandwidth: 90MHz
Bandwidth: 90MHz
4-Bit
ADG812YRUZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG812YRUZ-REEL7 Analog Switches & Multiplexers ICs applications.
- Automotive applications
- Isolation
- SDH
- HDTV
- High reliability control systems
- Fault Tolerant Systems
- Microprocessor controlled systems
- Industrial
- Precision data acquisition
- T1/E1 Terminals
