ADG819BCBZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Surface Mount |
| Package / Case | 6-WFBGA, WLCSP |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 600mOhm |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 5μW |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG819 |
| Pin Count | 6 |
| Number of Outputs | 2 |
| Power Supplies | 3/5V |
| Number of Channels | 1 |
| Interface | Parallel |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Power Dissipation | 5μW |
| Max Supply Current | 2μA |
| Turn On Delay Time | 45 ns |
| Number of Inputs | 1 |
| Supply Type | Single |
| Bandwidth | 17MHz |
| Turn-Off Delay Time | 16 ns |
| On-State Resistance (Max) | 600mOhm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 71 dB |
| Current - Leakage (IS(off)) (Max) | 250pA |
| Channel Capacitance (CS(off), CD(off)) | 80pF |
| On-state Resistance Match-Nom | 0.06Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 45ns, 16ns |
| Charge Injection | 20pC |
| Channel-to-Channel Matching (ΔRon) | 60m Ω |
| Crosstalk | -72dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 1.8V~5.5V |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG819BCBZ-REEL7 Overview
The electrical component comes in 6-WFBGA, WLCSP packaging, which makes it convenient to ship overseas. High reliability is provided by advanced packaging method Tape & Reel (TR). In Surface Mount, this analog switch is mounted. Multiplexer and demultiplexer circuits have a number 2:1. Temperatures around -40°C~85°C TA are extended for operation. In total, there are 6 terminations. A high-quality output is provided by the electrical component's 1 channels. With a 3V voltage supply, the electrical component should be turned on and run. There is an electrical component included in the 6 series. These analog multiplexers are built based on SPDT switching circuits. Use ADG819 to search for variants of the digital switches. It has an internal resistance of 600mOhm. The datasheets for the 6 pins explain the functions. In this analog multiplexer, the value is Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 5.5V. Analog switch ics with Single supply type are cost-effective. There should be 1.8V voltage fed to the electrical part below 1.8V. A voltage of 1.8V~5.5V is required to drain this analog switch from a single voltage supply. A digital multiplexer may suffer damage if voltage is applied above 2μA. In order to operate the 1 inputs, there are several steps to follow. There are various bandwidths available for data transfer. Multiplexer ics with 2 outputs are available.
ADG819BCBZ-REEL7 Features
1 Channels
Switch Circuit: SPDT
Bandwidth: 17MHz
ADG819BCBZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG819BCBZ-REEL7 Analog Switches & Multiplexers ICs applications.
- Fiber to the Home
- Audio and video routing
- Mechanical reed relay replacement
- Signal routing between systems
- Cable Modem
- Multi-Line E1 Interface Cards
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Battery Powered Instruments
- Avionics test equipment
- High speed data transmission line cards
