ADG821BRMZ

45ns, 16ns SPST - NO 600mOhm DUAL Analog Switches BREAK-BEFORE-MAKE ADG821 8 Pins 250pA 3.6V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG821BRMZ
Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Datasheet: PDF
Stock: 111
Description: 45ns, 16ns SPST - NO 600mOhm DUAL Analog Switches BREAK-BEFORE-MAKE ADG821 8 Pins 250pA 3.6V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Channel-to-Channel Matching (ΔRon)	160m Ω
Crosstalk	-82dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	67ns
Voltage - Supply, Single (V+)	1.8V~5.5V
Drain to Source Resistance	500mOhm
Normal Position	NO
Height	850μm
Length	3mm
Width	3mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 1 month ago)
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Surface Mount	YES
Number of Pins	8
Operating Temperature	-40°C~125°C TA
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Resistance	600mOhm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	5μW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	3.6V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG821
Output	SEPARATE OUTPUT
Pin Count	8
Power Supplies	3/5V
Number of Channels	2
Interface	Parallel
Max Supply Voltage	5.5V
Min Supply Voltage	1.8V
Nominal Supply Current	2μA
Power Dissipation	5μW
Max Supply Current	2μA
Throw Configuration	SPST
Turn On Delay Time	45 ns
Supply Type	Single
Bandwidth	24MHz
Turn-Off Delay Time	16 ns
On-State Resistance (Max)	600mOhm
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	52 dB
Current - Leakage (IS(off)) (Max)	250pA
Channel Capacitance (CS(off), CD(off))	85pF 98pF
On-state Resistance Match-Nom	0.16Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	45ns, 16ns
Charge Injection	15pC

ADG821BRMZ Overview

Shipping overseas is convenient due to the electrical component's packing in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width). The advanced packaging method Tube provides high reliability. It is mounted in the position Surface Mount. Multiplexers and demultiplexers have a ratio of 1:1. The operating temperature is extended to around -40°C~125°C TA. 8 terminations have been made so far. The electronic part provides high-quality output because it has 2 channels. Turning on and running the electrical part should be easy with a 3.6V voltage supply. 8 pins are injected to the electronic part body. These analog multiplexers are built based on SPST - NO switching circuits. Use ADG821 to search for variants of the digital switches. The internal resistance of this digital multiplexer is 600mOhm. The functions of 8 pins can be found in the datasheets. Multiplexer or Switches is a typical switch device. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. Single supply type digital switch with a low cost. The lowest voltage fed to the electronic component should be 1.8V. The voltage required by this switch device is 1.8V~5.5V, draining from a single voltage supply. If you put voltage higher than 2μA on the digital multiplexer, damage may occur. The digital multiplexer has SEPARATE OUTPUT outputs that can be used. 24MHz-bandwidths can be used to transfer data between multiplexers. It has a Drain to Source resistance of 500mOhm ohms.