Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 1 month ago) |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Resistance |
600mOhm |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
5μW |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
ADG821 |
Output |
SEPARATE OUTPUT |
Pin Count |
8 |
Qualification Status |
Not Qualified |
Power Supplies |
3/5V |
Number of Channels |
2 |
Interface |
Parallel |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
1.8V |
Operating Supply Current |
1nA |
Power Dissipation |
5μW |
Max Supply Current |
2μA |
Throw Configuration |
SPST |
Turn On Delay Time |
45 ns |
Supply Type |
Single |
Bandwidth |
24MHz |
Turn-Off Delay Time |
16 ns |
On-State Resistance (Max) |
600mOhm |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
52 dB |
Current - Leakage (IS(off)) (Max) |
250pA |
Channel Capacitance (CS(off), CD(off)) |
85pF 98pF |
On-state Resistance Match-Nom |
0.16Ohm |
Switch Circuit |
SPST - NO |
Switch Time (Ton, Toff) (Max) |
45ns, 16ns |
Charge Injection |
15pC |
Channel-to-Channel Matching (ΔRon) |
160m Ω |
Crosstalk |
-82dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Voltage - Supply, Single (V+) |
1.8V~5.5V |
Normal Position |
NO |
Height Seated (Max) |
1.1mm |
Length |
3mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ADG821BRMZ-REEL7 Overview
Shipping overseas is convenient with the electronic component packed in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width). High reliability is provided by advanced packaging method Tape & Reel (TR). In Surface Mount, this analog switch is mounted. There is 1:1 ratio between the number of multiplexers and demultiplexers. Increasing operating temperature to around -40°C~125°C TA. There are 8 terminations totally. High-quality output is provided by the electronic component's 2 channels. When the electronic component is given a voltage of 5V, it should be turned on and run. An electrical component of this type can be found in the 8 series. SPST - NO switching circuits are used in these analog switch ics. If you are looking for variants of the digital switch, trying search with ADG821. The internal resistance of this digital multiplexer is 600mOhm. To find out what the functions of 8 pins are, please refer to their datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. Analog switch ics with Single supply type are cost-effective. 1.8V should be the lowest voltage fed to the electronic component. The analogue multiplexer could operate on 1nA current. An analogue multiplexer drains from a single voltage supply at 1.8V~5.5V. A digital multiplexer may suffer damage if voltage is applied above 2μA. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them. A 24MHz-bandwidth can be used for data transfer.
ADG821BRMZ-REEL7 Features
2 Channels
Switch Circuit: SPST - NO
1nA Supply Current
Bandwidth: 24MHz
ADG821BRMZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG821BRMZ-REEL7 Analog Switches & Multiplexers ICs applications.
- MP3 players
- SDH/SONET multiplexers
- PBX interfaces
- Private Branch Exchange (PBX)
- SONET/SDH ADM
- Industrial control systems
- Industrial
- E1 Multiplexer
- Channelized and Unchannelized DS3 applications
- Wireless Local Loop