banner_page

ADG822BRM

45ns, 16ns SPST - NC 600mOhm DUAL Analog Switches 8 Pins 250pA 3.6V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)


  • Manufacturer: Rochester Electronics, LLC
  • Nocochips NO: 699-ADG822BRM
  • Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
  • Datasheet: PDF
  • Stock: 329
  • Description: 45ns, 16ns SPST - NC 600mOhm DUAL Analog Switches 8 Pins 250pA 3.6V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)(Kg)

Details

Tags

Parameters
Surface Mount YES
Operating Temperature -40°C~125°C TA
Packaging Tube
JESD-609 Code e0
Pbfree Code no
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
Terminal Finish TIN LEAD
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 240
Number of Functions 2
Supply Voltage 3.6V
Terminal Pitch 0.65mm
Reach Compliance Code unknown
Time@Peak Reflow Temperature-Max (s) 30
Pin Count 8
JESD-30 Code S-PDSO-G8
Supply Voltage-Max (Vsup) 5.5V
Number of Channels 1
Number of Circuits 2
-3db Bandwidth 24MHz
On-State Resistance (Max) 600mOhm
Multiplexer/Demultiplexer Circuit 1:1
Off-state Isolation-Nom 52 dB
Current - Leakage (IS(off)) (Max) 250pA
Channel Capacitance (CS(off), CD(off)) 85pF 98pF
On-state Resistance Match-Nom 0.16Ohm
Switch Circuit SPST - NC
Switch Time (Ton, Toff) (Max) 45ns, 16ns
Charge Injection 15pC
Channel-to-Channel Matching (ΔRon) 160m Ω
Crosstalk -82dB @ 1MHz
Switch-on Time-Max 67ns
Switch-off Time-Max 18ns
Voltage - Supply, Single (V+) 1.8V~5.5V
Height Seated (Max) 1.1mm
Length 3mm
RoHS Status Non-RoHS Compliant
Mounting Type Surface Mount
Package / Case 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

ADG822BRM Overview


The electronic component is convenient to ship overseas because it is packed in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width). Advanced packaging method Tube is used to provide high reliability. The multiplexer is located in Surface Mount. Multiplexers and demultiplexers have a ratio of 1:1. Around -40°C~125°C TA is the extended operating temperature. 8 terminations have been made so far. As a result of its 1 channels, this electronic component provides high-quality output. A 3.6V voltage supply should turn on and run the electronic component. An injection of 8 pins is performed into the body of the electrical component. A SPST - NC switching circuit is used to build these analog multiplexers. Circuits number 2 make up this analogue multiplexer. A voltage of 1.8V~5.5V is required to drain this analog switch from a single voltage supply.

ADG822BRM Features


1 Channels
Switch Circuit: SPST - NC
-3db Bandwidth: 24MHz

ADG822BRM Applications


There are a lot of Rochester Electronics, LLC ADG822BRM Analog Switches & Multiplexers ICs applications.

  • Multiplexers
  • Audio/video switches
  • Intelligent PBX
  • Data Acquisition Systems
  • Cross Connects
  • Audio and video routing
  • Cable Telephony – NIU, Set-Top Box, Home Side Box
  • T1/E1 Terminals
  • Precision instrumentation
  • Remote wireless modules

Write a review

Note: HTML is not translated!
    Bad           Good