ADG822BRMZ

45ns, 16ns SPST - NC 600mOhm DUAL Analog Switches BREAK-BEFORE-MAKE ADG822 8 Pins 250pA 3.6V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG822BRMZ
Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Datasheet: PDF
Stock: 137
Description: 45ns, 16ns SPST - NC 600mOhm DUAL Analog Switches BREAK-BEFORE-MAKE ADG822 8 Pins 250pA 3.6V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Channel Capacitance (CS(off), CD(off))	85pF 98pF
On-state Resistance Match-Nom	0.16Ohm
Switch Circuit	SPST - NC
Switch Time (Ton, Toff) (Max)	45ns, 16ns
Charge Injection	15pC
Channel-to-Channel Matching (ΔRon)	160m Ω
Crosstalk	-82dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	67ns
Voltage - Supply, Single (V+)	1.8V~5.5V
Normal Position	NC
Height	850μm
Length	3mm
Width	3mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 1 month ago)
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Surface Mount	YES
Number of Pins	8
Operating Temperature	-40°C~125°C TA
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Resistance	600mOhm
Subcategory	Multiplexer or Switches
Max Power Dissipation	5μW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	3.6V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	ADG822
Pin Count	8
Polarity	Non-Inverting
Power Supplies	3/5V
Number of Channels	2
Interface	Parallel
Max Supply Voltage	5.5V
Min Supply Voltage	1.8V
Power Dissipation	5μW
Max Supply Current	2μA
Throw Configuration	SPST
Turn On Delay Time	45 ns
Supply Type	Single
Bandwidth	24MHz
Turn-Off Delay Time	16 ns
On-State Resistance (Max)	600mOhm
High Level Output Current	200mA
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	52 dB
Current - Leakage (IS(off)) (Max)	250pA

ADG822BRMZ Overview

The electrical component comes in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) packaging, which makes it convenient to ship overseas. High reliability is ensured by the advanced packaging method Tube. It is mounted in the position Surface Mount. 1:1 is the ratio of multiplexer to demultiplexer circuits. An extended operating temperature of -40°C~125°C TA degrees Celsius. Total terminations are 8. Due to its 2 channels, the electrical component produces high-quality output. Powered by a 3.6V voltage supply, the electrical part should be switched on and run. As part of its design, the 8 series is equipped with this electronic component. A SPST - NC switching circuit is used for these analog switches. Try searching with ADG822 if you're looking for variants. This digital multiplexer has 600mOhm internal resistance. Datasheets for functions of 8 pins are available. It is a typical Multiplexer or Switches analog multiplexer. Users shouldn't supply more than 5.5V voltage to the switch device. Analogue multiplexers of the Single supply type that are cost-effective. A low voltage of 1.8V should be applied to the electronic component. The voltage required by this switch device is 1.8V~5.5V, draining from a single voltage supply. If you put voltage higher than 2μA on the digital multiplexer, damage may occur. A 24MHz-bandwidth can be used for data transfer.