Parameters |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tube |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Resistance |
600mOhm |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
5μW |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
240 |
Number of Functions |
2 |
Supply Voltage |
3.6V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
ADG823 |
Pin Count |
8 |
Power Supplies |
3/5V |
Number of Channels |
2 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
1.8V |
Power Dissipation |
5μW |
Max Supply Current |
2μA |
Throw Configuration |
SPST |
Turn On Delay Time |
45 ns |
Supply Type |
Single |
Turn-Off Delay Time |
16 ns |
-3db Bandwidth |
24MHz |
On-State Resistance (Max) |
600mOhm |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
52 dB |
Current - Leakage (IS(off)) (Max) |
250pA |
Channel Capacitance (CS(off), CD(off)) |
85pF 98pF |
On-state Resistance Match-Nom |
0.16Ohm |
Switch Circuit |
SPST - NO/NC |
Switch Time (Ton, Toff) (Max) |
45ns, 16ns |
Charge Injection |
15pC |
Channel-to-Channel Matching (ΔRon) |
160m Ω |
Crosstalk |
-82dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
67ns |
Voltage - Supply, Single (V+) |
1.8V~5.5V |
Height Seated (Max) |
1.1mm |
Length |
3mm |
Radiation Hardening |
No |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
ADG823BRM Overview
Packed in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width), the electronic component is convenient for shipping overseas. The advanced packaging method Tube provides high reliability. This analog switch is mounted in Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. Operational temperature extended around -40°C~125°C TA. There are 8 terminations totally. A 2 channel electronic part produces high-quality output. An 3.6V voltage supply should allow the electrical part to be turned on and run. An electrical component of this type can be found in the 8 series. Circuits based on SPST - NO/NC switching are used to construct these analog switch ics. Use ADG823 to search for variants of the digital switches. This digital multiplexer has 600mOhm internal resistance. The datasheets for the 8 pins explain the functions. Theswitch device is a typical Multiplexer or Switches. Users shouldn't supply more than 5.5V voltage to the switch device. Digital switch that provides Single power at a cost-effective price. A low voltage of 1.8V should be applied to the electronic component. An analogue multiplexer drains from a single voltage supply at 1.8V~5.5V. It may damage the digital multiplexer if the voltage is higher than 2μA.
ADG823BRM Features
2 Channels
Switch Circuit: SPST - NO/NC
-3db Bandwidth: 24MHz
ADG823BRM Applications
There are a lot of Analog Devices Inc. ADG823BRM Analog Switches & Multiplexers ICs applications.
- Avionics
- MP3 players
- High reliability control systems
- Transmit
- Ultrasound
- Audio/video switches
- Battery Powered Instruments
- Digital Cross-Connects
- Remote wireless modules
- ISDN NT1/TA