ADG823BRM-REEL

45ns, 16ns SPST - NO/NC 600mOhm DUAL Analog Switches BREAK-BEFORE-MAKE ADG823 8 Pins 250pA 3.6V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG823BRM-REEL
Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Datasheet: PDF
Stock: 418
Description: 45ns, 16ns SPST - NO/NC 600mOhm DUAL Analog Switches BREAK-BEFORE-MAKE ADG823 8 Pins 250pA 3.6V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Surface Mount	YES
Number of Pins	8
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Resistance	600mOhm
Terminal Finish	Tin/Lead (Sn/Pb)
Subcategory	Multiplexer or Switches
Max Power Dissipation	5μW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	240
Number of Functions	2
Supply Voltage	3.6V
Terminal Pitch	0.65mm
Reach Compliance Code	not_compliant
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG823
Pin Count	8
Qualification Status	Not Qualified
Power Supplies	3/5V
Number of Channels	2
Max Supply Voltage	5.5V
Min Supply Voltage	1.8V
Power Dissipation	5μW
Max Supply Current	2μA
Throw Configuration	SPST
Turn On Delay Time	45 ns
Supply Type	Single
Turn-Off Delay Time	16 ns
-3db Bandwidth	24MHz
On-State Resistance (Max)	600mOhm
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	52 dB
Current - Leakage (IS(off)) (Max)	250pA
Channel Capacitance (CS(off), CD(off))	85pF 98pF
On-state Resistance Match-Nom	0.16Ohm
Switch Circuit	SPST - NO/NC
Switch Time (Ton, Toff) (Max)	45ns, 16ns
Charge Injection	15pC
Channel-to-Channel Matching (ΔRon)	160m Ω
Crosstalk	-82dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	67ns
Voltage - Supply, Single (V+)	1.8V~5.5V
Height Seated (Max)	1.1mm
Length	3mm
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead

ADG823BRM-REEL Overview

Shipping overseas is convenient due to the electrical component's packing in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width). A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). This analog switch is mounted in Surface Mount. Multiplexers and demultiplexers have a number of circuits 1:1. Operation at a temperature around -40°C~125°C TA. Totally, there are 8 terminations. A 2 channel electronic part produces high-quality output. When the electronic component is given a voltage of 3.6V, it should be turned on and run. This electronic part can be found in the 8 series. Based on SPST - NO/NC switching circuits, these analog multiplexers work. Try searching with ADG823 to find analog multiplexer variants. In this multiplexer, the internal resistance is 600mOhm. Datasheets for functions of 8 pins are available. The analog multiplexer shown here is a typical Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 5.5V. Analogue multiplexers of the Single supply type that are cost-effective. A low voltage of 1.8V should be applied to the electronic component. This analogue multiplexer requires a voltage of 1.8V~5.5V when it drains from a single voltage supply. The switch multiplexer may be damaged if it is exposed to voltage greater than 2μA.