ADG824BCPZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-UFQFN, CSP |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 800mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 1.8V |
| Base Part Number | ADG824 |
| Pin Count | 10 |
| Number of Outputs | 4 |
| Number of Channels | 1 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.65V |
| Nominal Supply Current | 3nA |
| Max Supply Current | 500mA |
| Turn On Delay Time | 10.8 ns |
| Data Rate | 180 Mbps |
| Number of Inputs | 2 |
| Turn-Off Delay Time | 8.6 ns |
| -3db Bandwidth | 90MHz |
| On-State Resistance (Max) | 800mOhm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 71 dB |
| Current - Leakage (IS(off)) (Max) | 200pA Typ |
| Channel Capacitance (CS(off), CD(off)) | 25pF |
| On-state Resistance Match-Nom | 0.01Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 9.5ns, 7.7ns |
| Charge Injection | 27pC |
| Channel-to-Channel Matching (ΔRon) | 3m Ω |
| Crosstalk | -90dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 19.3ns |
| Voltage - Supply, Single (V+) | 1.65V~3.6V |
| Drain to Source Resistance | 800mOhm |
| On-State Resistance | 500mOhm |
| Height | 600μm |
| Length | 1.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG824BCPZ-REEL7 Overview
Shipping overseas is convenient due to the electrical component's packing in 10-UFQFN, CSP. This packaging method provides high reliability because it uses advanced packaging techniques. There is an analog multiplexer mounted in position Surface Mount. Multiplexers and demultiplexers have the same number of circuits 2:1. Temperatures around -40°C~85°C TA are extended for operation. A total of 10 terminations have been recorded. A high-quality output is provided by the electrical component's 1 channels. An 1.8V voltage supply should allow the electrical part to be turned on and run. An injection of 10 pins is performed into the body of the electrical component. A SPDT switching circuit is used for these analog switches. Try searching with ADG824 if you're looking for variants. An switch multiplexer with 800mOhm internal resistance has a value of 800mOhm. Please refer to the datasheets for 10 pins functions. Multiplexer or Switches is a typical switch device. Users shouldn't supply more than 3.6V voltage to the switch device. There should be 1.65V voltage fed to the electrical part below 1.65V. This analog switch requires a voltage of 1.65V~3.6V to drain from a single voltage supply. Put voltage above 500mA on the multiplexer to cause damage. The electrical component supports 2 inputs. Drain to Source resistance is 800mOhm. This digital multiplexer has 4 outputs.
ADG824BCPZ-REEL7 Features
1 Channels
Switch Circuit: SPDT
-3db Bandwidth: 90MHz
Drain-to-Source resistance: 800mOhm
ADG824BCPZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG824BCPZ-REEL7 Analog Switches & Multiplexers ICs applications.
- HDTV
- PDAs
- Automotive applications
- Relay Replacement
- SONET/SDH ADM
- Audio and video switching
- 65 V DACs
- Modems
- Access Concentrators
- Data Acquisition Systems
