ADG836LYRM

26ns, 7ns SPDT 650mOhm DUAL Analog Switches BREAK-BEFORE-MAKE ADG836 10 Pins 1nA 2.7V 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG836LYRM
Package: 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Datasheet: PDF
Stock: 971
Description: 26ns, 7ns SPDT 650mOhm DUAL Analog Switches BREAK-BEFORE-MAKE ADG836 10 Pins 1nA 2.7V 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Mounting Type	Surface Mount
Package / Case	10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Surface Mount	YES
Number of Pins	10
Operating Temperature	-40°C~125°C TA
Packaging	Tube
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	10
ECCN Code	EAR99
Resistance	650mOhm
Terminal Finish	Tin/Lead (Sn/Pb)
Subcategory	Multiplexer or Switches
Max Power Dissipation	3.6μW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	240
Number of Functions	2
Supply Voltage	2.7V
Terminal Pitch	0.5mm
Reach Compliance Code	not_compliant
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG836
Pin Count	10
Number of Outputs	4
Qualification Status	Not Qualified
Operating Supply Voltage	3.6V
Power Supplies	3/3.3V
Number of Channels	2
Interface	Parallel
Max Supply Voltage	3.6V
Min Supply Voltage	1.65V
Test Frequency	100kHz
Power Dissipation	3.6μW
Max Supply Current	1μA
Turn On Delay Time	26 ns
Supply Type	Single
Bandwidth	57MHz
Turn-Off Delay Time	7 ns
On-State Resistance (Max)	650mOhm
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	67 dB
Current - Leakage (IS(off)) (Max)	1nA
Channel Capacitance (CS(off), CD(off))	25pF
On-state Resistance Match-Nom	0.04Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	26ns, 7ns
Insertion Loss (dB)	0.05 dB
Charge Injection	40pC
Channel-to-Channel Matching (ΔRon)	40m Ω
Crosstalk	-90dB @ 100kHz
Switching	BREAK-BEFORE-MAKE
Voltage - Supply, Single (V+)	1.65V~3.6V
Normal Position	NC
Height Seated (Max)	1.1mm
Length	3mm
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead

ADG836LYRM Overview

Shipping overseas is convenient with the electronic component packed in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width). To ensure high reliability, a new packaging method Tube is used. In Surface Mount, you'll find this switch device. There is 2:1 ratio between the number of multiplexers and demultiplexers. Operational temperature extended around -40°C~125°C TA. In total, there are 10 terminations. High-quality output is provided by the electronic component's 2 channels. When the electronic component is given a voltage of 2.7V, it should be turned on and run. There are 10 pins injected into the electronic part body. A SPDT switching circuit is used to build these analog multiplexers. Try searching for ADG836 variants of the analog switch ic. A 650mOhm internal resistance characterizes this multiplexer. To find out what the 10 pins do, please refer to the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 3.6V. A cost-effective Single supply type analogue multiplexer. It is recommended to use 1.65V as the lowest voltage for the electrical part. This analog switch requires a voltage of 1.65V~3.6V to drain from a single voltage supply. When the digital multiplexer is charged above 1μA, damage can occur. Operating voltages of 3.6V are compatible with the electrical part. 57MHz bandwidths enable data to be transferred. The analog switch ics includes 4 outputs.