ADG836YCPZ-REEL
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 12-VFQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 12 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Resistance | 650mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 3.6μW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADG836 |
| Output | SEPARATE OUTPUT |
| Pin Count | 12 |
| Power Supplies | 1.8/3.3V |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.65V |
| Power Dissipation | 3.6μW |
| Max Supply Current | 1μA |
| Turn On Delay Time | 26 ns |
| Supply Type | Single |
| Turn-Off Delay Time | 7 ns |
| -3db Bandwidth | 57MHz |
| On-State Resistance (Max) | 650mOhm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 67 dB |
| Current - Leakage (IS(off)) (Max) | 200pA Typ |
| Channel Capacitance (CS(off), CD(off)) | 25pF |
| On-state Resistance Match-Nom | 0.1Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 26ns, 7ns |
| Charge Injection | 40pC |
| Channel-to-Channel Matching (ΔRon) | 40m Ω |
| Crosstalk | -90dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 9ns |
| Voltage - Supply, Single (V+) | 1.65V~3.6V |
| Height Seated (Max) | 1mm |
| Length | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG836YCPZ-REEL Overview
The electrical component comes in 12-VFQFN Exposed Pad, CSP packaging, which makes it convenient to ship overseas. High reliability is provided by advanced packaging method Tape & Reel (TR). In Surface Mount, this analog switch is mounted. 2:1 is the ratio between multiplexers and demultiplexers. Temperatures around -40°C~125°C TA are extended for operation. 12 terminations have been made so far. A high-quality output is provided by the electrical component's 2 channels. In the case of a voltage supply of 1.8V volts, the electrical part can be powered up and run. An injection of 12 pins is performed into the body of the electrical component. Unlike digital switches, these are based on SPDT switching circuits. There are 2 circuits in this switch device. Use ADG836 to search for variants of the digital switches. The internal resistance of this digital multiplexer is 650mOhm. Datasheets for functions of 12 pins are available. There is Multiplexer or Switches analog multiplexer like this in the world. Users shouldn't supply more than 3.6V voltage to the switch device. Digital switch that provides Single power at a cost-effective price. There should be 1.65V voltage fed to the electrical part below 1.65V. Using only a single voltage supply, this analog switch requires 1.65V~3.6V voltage. When the digital multiplexer is charged above 1μA, damage can occur. This analog switch ic utilizes SEPARATE OUTPUT output.
ADG836YCPZ-REEL Features
2 Channels
Switch Circuit: SPDT
-3db Bandwidth: 57MHz
ADG836YCPZ-REEL Applications
There are a lot of Analog Devices Inc. ADG836YCPZ-REEL Analog Switches & Multiplexers ICs applications.
- DVD-R
- Modems
- Sample hold systems
- Industrial
- PBX interfaces
- Avionics test equipment
- RGB switches
- Audio and video signal routing
- Switching Systems
- Communication systems
