ADG836YRM
| Parameters | |
|---|---|
| Length | 3mm |
| RoHS Status | Non-RoHS Compliant |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| Terminal Finish | TIN LEAD |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 10 |
| JESD-30 Code | S-PDSO-G10 |
| Supply Voltage-Max (Vsup) | 1.95V |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| -3db Bandwidth | 57MHz |
| On-State Resistance (Max) | 650mOhm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 67 dB |
| Current - Leakage (IS(off)) (Max) | 200pA Typ |
| Channel Capacitance (CS(off), CD(off)) | 25pF |
| On-state Resistance Match-Nom | 0.1Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 26ns, 7ns |
| Charge Injection | 40pC |
| Channel-to-Channel Matching (ΔRon) | 40m Ω |
| Crosstalk | -90dB @ 100kHz |
| Switch-on Time-Max | 37ns |
| Switch-off Time-Max | 9ns |
| Voltage - Supply, Single (V+) | 1.65V~3.6V |
| Height Seated (Max) | 1.1mm |
ADG836YRM Overview
The electronic component is convenient to ship overseas because it is packed in a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width). The advanced packaging method Tube provides high reliability. The multiplexer is located in Surface Mount. There is 2:1 ratio between the number of multiplexers and demultiplexers. Operating temperature extended to -40°C~125°C TA. In total, there are 10 terminations. As a result of its 1 channels, this electronic component provides high-quality output. In the case of a voltage supply of 1.8V volts, the electrical part can be powered up and run. Into the electrical component body are injected 10 pins. The analog switch ics are built using SPDT switching circuits. The multiplexer consists of 2 circuits. A voltage of 1.65V~3.6V is required for this switch device, which drains from a single voltage source.
ADG836YRM Features
1 Channels
Switch Circuit: SPDT
-3db Bandwidth: 57MHz
ADG836YRM Applications
There are a lot of Rochester Electronics, LLC ADG836YRM Analog Switches & Multiplexers ICs applications.
- Modems
- Cell phones
- Data Acquisition Systems
- SDH
- High speed data transmission line cards
- Frame Relay Equipment
- DSUs
- High-Voltage
- Residential Gateways, Home Gateway/Router
- RGB switches
