ADG839YKSZ-500RL7

16ns, 8.5ns SPDT 500mOhm DUAL Analog Switches BREAK-BEFORE-MAKE ADG839 6 Pins 200pA Typ 2.5V 6-TSSOP, SC-88, SOT-363

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG839YKSZ-500RL7
Package: 6-TSSOP, SC-88, SOT-363
Datasheet: PDF
Stock: 506
Description: 16ns, 8.5ns SPDT 500mOhm DUAL Analog Switches BREAK-BEFORE-MAKE ADG839 6 Pins 200pA Typ 2.5V 6-TSSOP, SC-88, SOT-363(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 1 month ago)
Contact Plating	Gold
Mounting Type	Surface Mount
Package / Case	6-TSSOP, SC-88, SOT-363
Surface Mount	YES
Number of Pins	6
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	6
ECCN Code	EAR99
Resistance	500mOhm
Subcategory	Multiplexer or Switches
Max Power Dissipation	3.6μW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	2.5V
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	ADG839
Pin Count	6
Number of Outputs	2
Operating Supply Voltage	3.6V
Polarity	Non-Inverting
Number of Channels	1
Max Supply Voltage	3.6V
Min Supply Voltage	1.65V
Test Frequency	100kHz
Nominal Supply Current	4μA
Power Dissipation	3.6μW
Max Supply Current	1μA
Turn On Delay Time	16 ns
Supply Type	Single
Bandwidth	25MHz
Turn-Off Delay Time	8.5 ns
On-State Resistance (Max)	500mOhm
High Level Output Current	300mA
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	57 dB
Current - Leakage (IS(off)) (Max)	200pA Typ
Channel Capacitance (CS(off), CD(off))	74pF
On-state Resistance Match-Nom	0.04Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	16ns, 8.5ns
Insertion Loss (dB)	0.01 dB
Charge Injection	70pC
Channel-to-Channel Matching (ΔRon)	40m Ω
Crosstalk	-57dB @ 100kHz
Switching	BREAK-BEFORE-MAKE
Voltage - Supply, Single (V+)	1.65V~3.6V
Drain to Source Resistance	500mOhm
Normal Position	NC
Height	1mm
Length	2mm
Width	1.25mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG839YKSZ-500RL7 Overview

Shipping overseas is convenient due to the electrical component's packing in 6-TSSOP, SC-88, SOT-363. High reliability is ensured by the advanced packaging method Tape & Reel (TR). Multiplexers like this are mounted in the Surface Mount position. In the multiplexer and demultiplexer, 2:1 represents the number of circuits. An extended operating temperature of -40°C~125°C TA degrees Celsius. The total number of terminations is 6. This electronic part offers high-quality output due to its 1 channels. With a 2.5V voltage supply, the electrical component should be turned on and run. It is injected into the electrical part body with 6 pins. Based on SPDT switching circuits, these analog multiplexers work. Try searching with ADG839 if you're looking for variants. It has an internal resistance of 500mOhm. For details about the functions of 6 pins, please refer to the datasheets. This switch device is a typical Multiplexer or Switches. normally, users should not supply switches with voltages higher than 3.6V. Analog switch ics with Single supply type are cost-effective. There should be 1.65V voltage fed to the electrical part below 1.65V. Using only a single voltage supply, this analog switch requires 1.65V~3.6V voltage. When the digital multiplexer is charged above 1μA, damage can occur. A voltage of 3.6V can be used to operate the electronic component. There are various bandwidths available for data transfer. This electronic component presents a Drain to Source resistance of 500mOhm. The analog switch ics includes 2 outputs.