ADG842YKSZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 370mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 14.4μW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADG842 |
| Pin Count | 6 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.6V |
| Number of Channels | 1 |
| Interface | Parallel |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.65V |
| Test Frequency | 100kHz |
| Operating Supply Current | 3nA |
| Power Dissipation | 14.4μW |
| Max Supply Current | 4μA |
| Throw Configuration | SPST |
| Turn On Delay Time | 14 ns |
| Supply Type | Single |
| Bandwidth | 21MHz |
| Turn-Off Delay Time | 7.8 ns |
| On-State Resistance (Max) | 370mOhm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 54 dB |
| Current - Leakage (IS(off)) (Max) | 200pA Typ |
| Channel Capacitance (CS(off), CD(off)) | 160pF 160pF |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 14ns, 7.8ns |
| Insertion Loss (dB) | 0.2 dB |
| Charge Injection | 200pC |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 8.2ns |
| Voltage - Supply, Single (V+) | 1.65V~3.6V |
| Normal Position | NC |
| Length | 2mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG842YKSZ-REEL7 Overview
The electrical component comes in 6-TSSOP, SC-88, SOT-363 packaging, which makes it convenient to ship overseas. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. In Surface Mount, this analog switch is mounted. There is 1:1 ratio between the number of multiplexers and demultiplexers. Around -40°C~125°C TA is the extended operating temperature. There are 6 terminations totally. High-quality output is provided by the electronic component's 1 channels. With a 2.5V voltage supply, the electrical component should be turned on and run. This electrical component is included in the 6 series of products. A SPST - NC switching circuit is used for these analog switches. ADG842 can be used to search for analog multiplexer variants. The internal resistance of this digital multiplexer is 370mOhm. Please refer to the datasheets for 6 pins functions. There is a standard Multiplexer or Switches analogue multiplexer here. It is generally not recommended to supply a voltage higher than 3.6V to the switch device in normal circumstances. Single supply type digital switch with a low cost. There should be 1.65V voltage fed to the electrical part below 1.65V. This digital switch can be operated with a current of 3nA. A voltage of 1.65V~3.6V is required for this switch device, which drains from a single voltage source. The switch multiplexer may be damaged if it is exposed to voltage greater than 4μA. A voltage of 3.6V can be used to operate the electronic component. A 21MHz-bandwidth can be used for data transfer.
ADG842YKSZ-REEL7 Features
1 Channels
Switch Circuit: SPST - NC
3nA Supply Current
Bandwidth: 21MHz
ADG842YKSZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG842YKSZ-REEL7 Analog Switches & Multiplexers ICs applications.
- Private Branch Exchange (PBX)
- Transmit
- Communication systems
- Routers
- 65 V DACs
- Microwave transmission systems
- Channelized and Unchannelized DS3 applications
- SONET
- Battery-powered systems
- Cable Telephony – NIU, Set-Top Box, Home Side Box
