ADG849YKSZ-REEL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 600mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADG849 |
| Pin Count | 6 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 1 |
| Interface | Parallel |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Test Frequency | 100kHz |
| Operating Supply Current | 1nA |
| Power Dissipation | 5.5nW |
| Max Supply Current | 1nA |
| Turn On Delay Time | 15 ns |
| Supply Type | Single |
| Bandwidth | 38MHz |
| Turn-Off Delay Time | 13 ns |
| On-State Resistance (Max) | 600mOhm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 64 dB |
| Current - Leakage (IS(off)) (Max) | 10pA Typ |
| Channel Capacitance (CS(off), CD(off)) | 52pF |
| On-state Resistance Match-Nom | 0.05Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 15ns, 13ns |
| Insertion Loss (dB) | 0.04 dB |
| Charge Injection | 50pC |
| Channel-to-Channel Matching (ΔRon) | 50m Ω |
| Crosstalk | -64dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 1.8V~5.5V |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG849YKSZ-REEL Overview
Presented in 6-TSSOP, SC-88, SOT-363, this electrical component is convenient for overseas shipping. High reliability is ensured by the advanced packaging method Tape & Reel (TR). A switch device like this is mounted in Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 2:1. Temperatures around -40°C~125°C TA are extended for operation. Totally, there are 6 terminations. As a result of its 1 channels, this electronic component provides high-quality output. Powered by a 5V voltage supply, the electrical part should be switched on and run. It is injected into the electrical part body with 6 pins. SPDT switching circuits are used in these analog switch ics. Look for analog switch ic variants by searching with ADG849. This digital multiplexer has 600mOhm internal resistance. Please refer to the datasheets for 6 pins functions. In this analog multiplexer, the value is Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. Analogue multiplexer with a Single supply type that is cost-effective. 1.8V should be the lowest voltage fed to the electronic component. This digital switch can be operated with a current of 1nA. An analogue multiplexer drains from a single voltage supply at 1.8V~5.5V. A digital multiplexer may suffer damage if voltage is applied above 1nA. There is a voltage range of 5.5V operating voltages for the electrical part. The transfer of data can be performed over 38MHz bandwidths. There are 2 outputs on the analogue multiplexer.
ADG849YKSZ-REEL Features
1 Channels
Switch Circuit: SPDT
1nA Supply Current
Bandwidth: 38MHz
ADG849YKSZ-REEL Applications
There are a lot of Analog Devices Inc. ADG849YKSZ-REEL Analog Switches & Multiplexers ICs applications.
- Optical Applications
- Industrial control systems
- Video signal routing
- Audio and video switching
- Fiber to the Home
- Cell phones
- Voice over IP/DSL – Integrated Access Devices, Smart
- E1 Network Equipment
- ISDN NT1/TA
- ATM
