ADG854BCPZ-REEL
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 10-UFQFN, CSP |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 850mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.4mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ADG854 |
| Output | SEPARATE OUTPUT |
| Pin Count | 10 |
| Qualification Status | Not Qualified |
| Power Supplies | 3/5V |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| -3db Bandwidth | 100MHz |
| On-State Resistance (Max) | 850mOhm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 75 dB |
| Current - Leakage (IS(off)) (Max) | 10pA Typ |
| Channel Capacitance (CS(off), CD(off)) | 19.5pF |
| On-state Resistance Match-Nom | 0.03Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 23ns, 8.5ns |
| Charge Injection | 30pC |
| Channel-to-Channel Matching (ΔRon) | 20m Ω |
| Crosstalk | -85dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 43ns |
| Switch-off Time-Max | 8ns |
| Voltage - Supply, Single (V+) | 1.8V~5.5V |
| Height Seated (Max) | 0.6mm |
| Length | 1.6mm |
| RoHS Status | ROHS3 Compliant |
ADG854BCPZ-REEL Overview
Packed in 10-UFQFN, CSP, the electronic component is convenient for shipping overseas. The advanced packaging method Tape & Reel (TR) provides high reliability. The multiplexer is located in Surface Mount. There is 2:1 ratio between the number of multiplexers and demultiplexers. Operation at a temperature around -40°C~85°C TA. Total terminations are 10. As a result of its 1 channels, this electronic component provides high-quality output. In the case of a voltage supply of 2.7V volts, the electrical part can be powered up and run. As part of the design of the 10 series, this electronic part has been incorporated into the system. These analog multiplexers are built based on SPDT switching circuits. A 2 circuit is present in this switch device. Look for analog switch ic variants by searching with ADG854. The internal resistance of this digital multiplexer is 850mOhm. For functions related to 10 pins, please refer to the datasheets. Theswitch device is a typical Multiplexer or Switches. Users shouldn't supply more than 5.5V voltage to the switch device. A low voltage of 1.8V should be applied to the electronic component. An analogue multiplexer drains from a single voltage supply at 1.8V~5.5V. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them.
ADG854BCPZ-REEL Features
1 Channels
Switch Circuit: SPDT
-3db Bandwidth: 100MHz
ADG854BCPZ-REEL Applications
There are a lot of Analog Devices Inc. ADG854BCPZ-REEL Analog Switches & Multiplexers ICs applications.
- SDH/SONET multiplexers
- Power routing
- Sample hold systems
- Modems
- SONET
- Relay replacements
- Cellular phones
- Digital cross connects (DSX-1)
- Automotive applications
- Wireless Local Loop
