ADG854BCPZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-UFQFN, CSP |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 1.5Ohm |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.4mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADG854 |
| Pin Count | 10 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Operating Supply Current | 1μA |
| Turn On Delay Time | 37 ns |
| Number of Inputs | 2 |
| Bandwidth | 100MHz |
| Turn-Off Delay Time | 8.5 ns |
| On-State Resistance (Max) | 850mOhm |
| High Level Output Current | 300mA |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 75 dB |
| Current - Leakage (IS(off)) (Max) | 10pA Typ |
| Channel Capacitance (CS(off), CD(off)) | 19.5pF |
| On-state Resistance Match-Nom | 0.03Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 23ns, 8.5ns |
| Charge Injection | 30pC |
| Channel-to-Channel Matching (ΔRon) | 20m Ω |
| Crosstalk | -85dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 43ns |
| Voltage - Supply, Single (V+) | 1.8V~5.5V |
| Height Seated (Max) | 0.6mm |
| Length | 1.6mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG854BCPZ-REEL7 Overview
Shipping overseas is convenient with the electronic component packed in 10-UFQFN, CSP. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. This analog switch is mounted in Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 2:1. Increasing operating temperature to around -40°C~85°C TA. 10 terminations have been made so far. As a result of its 1 channels, this electronic component provides high-quality output. A 2.7V voltage supply should turn on and run the electronic component. This electronic part can be found in the 10 series. On the other hand, analog switches can be constructed using SPDT switching circuits. Try searching for ADG854 variants of the analog switch ic. This digital multiplexer has 1.5Ohm internal resistance. Datasheets for 10 pin functions are available upon request. Multiplexer or Switches is a typical switch device. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. 1.8V is the lowest voltage the electrical component should receive. For this multiplexer to operate, 1μA current would be sufficient. Draining from a single voltage supply, this analog switch requires a voltage of 1.8V~5.5V. 5V operating voltages are supported by the electronic component. Operating the 2 inputs requires 2 inputs. This switch operates within the bandwidth of 100MHz. In this digital multiplexer, there are 8 outputs.
ADG854BCPZ-REEL7 Features
1 Channels
Switch Circuit: SPDT
1μA Supply Current
Bandwidth: 100MHz
ADG854BCPZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG854BCPZ-REEL7 Analog Switches & Multiplexers ICs applications.
- Digital Cross-Connects
- Sample-and-hold systems
- SDH
- Voice over IP/DSL – Integrated Access Devices, Smart
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- ATM
- Cross Connects
- Audio/video switches
- Fault Tolerant Systems
- Transmit
