ADG884BRMZ

50ns, 20ns SPDT 370mOhm DUAL Analog Switches BREAK-BEFORE-MAKE ADG884 10 Pins 200pA Typ 2.7V 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG884BRMZ
Package: 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Datasheet: PDF
Stock: 346
Description: 50ns, 20ns SPDT 370mOhm DUAL Analog Switches BREAK-BEFORE-MAKE ADG884 10 Pins 200pA Typ 2.7V 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 1 month ago)
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Surface Mount	YES
Number of Pins	10
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	10
ECCN Code	EAR99
Resistance	370mOhm
Subcategory	Multiplexer or Switches
Max Power Dissipation	5.5μW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	2.7V
Terminal Pitch	0.5mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG884
Pin Count	10
Number of Outputs	4
Operating Supply Voltage	5.5V
Polarity	Non-Inverting
Power Supplies	5V
Number of Channels	2
Interface	Parallel
Max Supply Voltage	5.5V
Min Supply Voltage	1.8V
Test Frequency	100kHz
Analog IC - Other Type	AUDIO/VIDEO SWITCH
Nominal Supply Current	1μA
Power Dissipation	5.5μW
Max Supply Current	1μA
Turn On Delay Time	50 ns
Supply Type	Single
Bandwidth	18MHz
Turn-Off Delay Time	20 ns
On-State Resistance (Max)	370mOhm
High Level Output Current	400mA
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	60 dB
Current - Leakage (IS(off)) (Max)	200pA Typ
Channel Capacitance (CS(off), CD(off))	103pF
On-state Resistance Match-Nom	0.02Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	50ns, 20ns
Insertion Loss (dB)	0.03 dB
Charge Injection	125pC
Channel-to-Channel Matching (ΔRon)	10m Ω
Crosstalk	-120dB @ 100kHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	56ns
Switch-off Time-Max	19ns
Voltage - Supply, Single (V+)	1.8V~5.5V
Drain to Source Resistance	280mOhm
Normal Position	NC
Height	850μm
Length	3mm
Width	3mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG884BRMZ Overview

As the electronic part is packed in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width), international shipping is convenient. A high level of reliability can be achieved through the use of an advanced packaging method Tube. This analog switch is mounted in Surface Mount. 2:1 is the number of circuits in the multiplexer and demultiplexer. Temperatures around -40°C~85°C TA are extended for operation. Total terminations are 10. The electronic part provides high-quality output because it has 2 channels. A 2.7V voltage supply should turn on and run the electronic component. Electronic part bodies are injected with 10 pins. Unlike digital switches, these are based on SPDT switching circuits. Search with ADG884 if you are looking for analog multiplexer variants. There is 370mOhm internal resistance in this digital multiplexer. To find out what the functions of 10 pins are, please refer to their datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. Users should never supply a voltage higher than 5.5V to a switch device. An effective Single supply digital multiplexer. It is recommended that the electrical component receives a voltage of 1.8V. This analogue multiplexer requires a voltage of 1.8V~5.5V when it drains from a single voltage supply. A digital multiplexer may suffer damage if voltage is applied above 1μA. It is integrated with AUDIO/VIDEO SWITCH analog ICs. Operating voltages of 5.5V are compatible with the electrical part. The data can be transferred over a wide range of bandwidths, called 18MHz bandwidths. Drain to Source resistance is 280mOhm. The analog switch ics has 4 outputs.