ADG888YCPZ-REEL
| Parameters | |
|---|---|
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADG888 |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Power Supplies | 3/5V |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Power Dissipation | 20μW |
| Max Supply Current | 4μA |
| Turn On Delay Time | 30 ns |
| Number of Inputs | 4 |
| Supply Type | Single |
| Turn-Off Delay Time | 17 ns |
| -3db Bandwidth | 29MHz |
| On-State Resistance (Max) | 480mOhm |
| Multiplexer/Demultiplexer Circuit | 2:2 |
| Off-state Isolation-Nom | 67 dB |
| Current - Leakage (IS(off)) (Max) | 200pA Typ |
| Channel Capacitance (CS(off), CD(off)) | 58pF |
| On-state Resistance Match-Nom | 0.045Ohm |
| Switch Circuit | DPDT |
| Switch Time (Ton, Toff) (Max) | 30ns, 17ns |
| Charge Injection | 70pC |
| Channel-to-Channel Matching (ΔRon) | 40m Ω |
| Crosstalk | -99dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 50ns |
| Voltage - Supply, Single (V+) | 1.8V~5.5V |
| Height Seated (Max) | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Mounting Type | Surface Mount |
| Package / Case | 16-VQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 480mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 20μW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
ADG888YCPZ-REEL Overview
Due to its 16-VQFN Exposed Pad, CSP packaging, the electronic part is convenient for international shipping. High reliability is achieved by using advanced packaging method Tape & Reel (TR). This analog switch is mounted in Surface Mount. 2:2 is the number of circuits in the multiplexer and demultiplexer. Increasing operating temperature to around -40°C~125°C TA. In total, 16 terminations have occurred. This electronic part offers high-quality output due to its 2 channels. Turning on and running the electrical part should be easy with a 2.7V voltage supply. As part of its design, the 16 series is equipped with this electronic component. Based on DPDT switching circuits, these analog multiplexers work. If you are looking for variants of the digital switch, trying search with ADG888. An switch multiplexer with 480mOhm internal resistance has a value of 480mOhm. Datasheets for 16 pin functions are available upon request. In this analog multiplexer, the value is Multiplexer or Switches. In normalcircumstances, users should not exceed 5.5V volts for the multiplexer. Analogue multiplexer with a Single supply type that is cost-effective. The lowest voltage the electronic part should receive is 1.8V. The voltage required by this switch device is 1.8V~5.5V, draining from a single voltage supply. If put voltage greater than 4μA on the device, damage may be caused to the analogue multiplexer. Among the inputs that can be operated are the 4 inputs. 8 outputs are included in the analogue multiplexer.
ADG888YCPZ-REEL Features
2 Channels
Switch Circuit: DPDT
-3db Bandwidth: 29MHz
ADG888YCPZ-REEL Applications
There are a lot of Analog Devices Inc. ADG888YCPZ-REEL Analog Switches & Multiplexers ICs applications.
- DVD-R
- Precision data acquisition
- Modems
- Microprocessor Controlled Analog Systems
- Microwave transmission systems
- Mechanical reed relay replacement
- CSU
- Cell phones
- Relay replacements
- Communication systems
