Parameters |
Switch-on Time-Max |
50ns |
Voltage - Supply, Single (V+) |
1.8V~5.5V |
Height Seated (Max) |
1mm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 2 weeks ago) |
Contact Plating |
Tin |
Mounting Type |
Surface Mount |
Package / Case |
16-VQFN Exposed Pad, CSP |
Surface Mount |
YES |
Number of Pins |
16 |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
480mOhm |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
20μW |
Technology |
CMOS |
Terminal Position |
QUAD |
Terminal Form |
NO LEAD |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
2.7V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
ADG888 |
Pin Count |
16 |
Number of Outputs |
8 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
5.5V |
Power Supplies |
3/5V |
Number of Channels |
2 |
Interface |
Parallel |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
1.8V |
Test Frequency |
100kHz |
Power Dissipation |
20μW |
Max Supply Current |
4μA |
Turn On Delay Time |
30 ns |
Number of Inputs |
4 |
Supply Type |
Single |
Bandwidth |
29MHz |
Turn-Off Delay Time |
17 ns |
On-State Resistance (Max) |
480mOhm |
Multiplexer/Demultiplexer Circuit |
2:2 |
Off-state Isolation-Nom |
67 dB |
Current - Leakage (IS(off)) (Max) |
200pA Typ |
Channel Capacitance (CS(off), CD(off)) |
58pF |
On-state Resistance Match-Nom |
0.045Ohm |
Switch Circuit |
DPDT |
Switch Time (Ton, Toff) (Max) |
30ns, 17ns |
Insertion Loss (dB) |
0.03 dB |
Charge Injection |
70pC |
Channel-to-Channel Matching (ΔRon) |
40m Ω |
Crosstalk |
-99dB @ 100kHz |
Switching |
BREAK-BEFORE-MAKE |
ADG888YCPZ-REEL7 Overview
Packed in 16-VQFN Exposed Pad, CSP, the electronic component is convenient for shipping overseas. High reliability is ensured by the advanced packaging method Tape & Reel (TR). It is mounted in the position Surface Mount. Multiplexer and demultiplexer circuits have a number 2:2. Temperatures around -40°C~125°C TA are extended for operation. There are 16 terminations totally. As a result of its 2 channels, this electronic component provides high-quality output. If the voltage supply is 2.7V volts, the electrical component should be turned on and run. A key feature of the 16 series is the inclusion of this electronic part as part of its design. A DPDT switching circuit is used for these analog switches. Try searching for ADG888 variants of the analog switch ic. In this multiplexer, the internal resistance is 480mOhm. You can find the functions of the 16 pins in the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. normally, users should not supply switches with voltages higher than 5.5V. Analogue multiplexer with a Single supply type that is cost-effective. In order for the electronic part to function properly, the lowest voltage should be 1.8V. Analogue multiplexers require a 1.8V~5.5V voltage to drain from a single voltage supply. The analogue multiplexer may be damaged if voltage is greater than 4μA. The electrical part can be operated at 5.5V voltage levels. There are 4 inputs to be operated. In 29MHz-bandwidths, data can be transferred. In this digital multiplexer, there are 8 outputs.
ADG888YCPZ-REEL7 Features
2 Channels
Switch Circuit: DPDT
Bandwidth: 29MHz
ADG888YCPZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG888YCPZ-REEL7 Analog Switches & Multiplexers ICs applications.
- Precision test equipment
- USB 1.1 signal switching circuits
- Medical
- Medical Instrumentation
- Ultrasound
- Data switching
- Central office
- Audio and video signal routing
- Multiplexers
- Access Concentrators