ADG904BCPZ
| Parameters | |
|---|---|
| Number of Channels | 4 |
| Interface | Parallel |
| Number of Circuits | 1 |
| Max Supply Voltage | 2.75V |
| Min Supply Voltage | 1.65V |
| Test Frequency | 100MHz |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Power Dissipation | 2.75μW |
| Turn On Delay Time | 8.5 ns |
| Number of Inputs | 4 |
| Bandwidth | 2.5 GHz |
| Turn-Off Delay Time | 13 ns |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 37 dB |
| Current - Leakage (IS(off)) (Max) | 1μA |
| Channel Capacitance (CS(off), CD(off)) | 2pF |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 10ns, 16ns |
| Insertion Loss (dB) | 0.4 dB |
| Crosstalk | -58dB @ 100MHz |
| Voltage - Supply, Single (V+) | 1.65V~2.75V |
| P1dB | 16 dBm |
| Height | 830μm |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 20-WFQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Max Power Dissipation | 2.75μW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Frequency | 2GHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADG904 |
| Pin Count | 20 |
| Operating Supply Voltage | 2.75V |
ADG904BCPZ Overview
Packed in 20-WFQFN Exposed Pad, CSP, the electronic component is convenient for shipping overseas. This high-reliability packaging method uses advanced packaging methods Tray. In Surface Mount, this analog switch is mounted. In the multiplexer and demultiplexer, 4:1 represents the number of circuits. The operating temperature is extended to around -40°C~85°C TA. In total, there are 20 terminations. The electronic part provides high-quality output because it has 4 channels. When the electronic component is given a voltage of 2.5V, it should be turned on and run. This electronic part can be found in the 20 series. On the other hand, analog switches can be constructed using SP4T switching circuits. A 1 circuit is present in this switch device. Try searching for ADG904 variants of the analog switch ic. To find out what the functions of 20 pins are, please refer to their datasheets. It is generally not recommended to supply a voltage higher than 2.75V to the switch device in normal circumstances. 1.65V is the lowest voltage that should be fed to the electronic electronic part. A voltage of 1.65V~2.75V is required for this switch device, which drains from a single voltage source. Integrated with SINGLE-ENDED MULTIPLEXER analog IC. A voltage of 2.75V can be used to operate the electronic component. Among the inputs that can be operated are the 4 inputs. There are 2.5 GHz bandwidths for data transfer.
ADG904BCPZ Features
4 Channels
Switch Circuit: SP4T
Bandwidth: 2.5 GHz
ADG904BCPZ Applications
There are a lot of Analog Devices Inc. ADG904BCPZ Analog Switches & Multiplexers ICs applications.
- Wireless Local Loop
- Industrial control systems
- Central office
- Avionics
- Automatic test equipment
- Automotive applications
- Mechanical reed relay replacement
- Relay Replacement
- Fault Tolerant Systems
- Voice over IP/DSL – Integrated Access Devices, Smart
