ADG904BCPZ-REEL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-WFQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 2.75μW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Frequency | 2.5GHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADG904 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.75V |
| Number of Channels | 4 |
| Interface | Parallel |
| Number of Circuits | 1 |
| Max Supply Voltage | 2.75V |
| Min Supply Voltage | 1.65V |
| Test Frequency | 100MHz |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Power Dissipation | 2.75μW |
| Turn On Delay Time | 8.5 ns |
| Number of Inputs | 4 |
| Bandwidth | 2.5 GHz |
| Turn-Off Delay Time | 13 ns |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 37 dB |
| Current - Leakage (IS(off)) (Max) | 1μA |
| Channel Capacitance (CS(off), CD(off)) | 2pF |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 10ns, 16ns |
| Insertion Loss (dB) | 0.4 dB |
| Crosstalk | -58dB @ 100MHz |
| Voltage - Supply, Single (V+) | 1.65V~2.75V |
| P1dB | 16 dBm |
| Length | 4mm |
| Width | 3.75mm |
| Thickness | 850μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG904BCPZ-REEL Overview
This electronic part is conveniently packaged in 20-WFQFN Exposed Pad, CSP, making it easy to ship abroad. High reliability is ensured by the advanced packaging method Tape & Reel (TR). Surface Mount is where this multiplexer is located. In the multiplexer and demultiplexer, 4:1 represents the number of circuits. The operating temperature is extended to around -40°C~85°C TA. In total, there are 20 terminations. By its 4 channels, the electronic component provides high-quality output. Turning on and running the electrical part should be easy with a 2.5V voltage supply. A key feature of the 20 series is the inclusion of this electronic part as part of its design. A SP4T switching circuit is used to build these analog multiplexers. The multiplexer consists of 1 circuits. Search with ADG904 if you are looking for analog multiplexer variants. The datasheets for the 20 pins explain the functions. In a normalsituation, users should not supply the switches with voltage higher than 2.75V. A low voltage of 1.65V should be applied to the electronic component. An analogue multiplexer drains from a single voltage supply at 1.65V~2.75V. It is integrated with SINGLE-ENDED MULTIPLEXER analog ICs. A voltage of 2.75V can be used to operate the electronic component. Operating 4 inputs is required. The transfer of data can be performed over 2.5 GHz bandwidths.
ADG904BCPZ-REEL Features
4 Channels
Switch Circuit: SP4T
Bandwidth: 2.5 GHz
ADG904BCPZ-REEL Applications
There are a lot of Analog Devices Inc. ADG904BCPZ-REEL Analog Switches & Multiplexers ICs applications.
- Remote Powered Equipment
- 65 V DACs
- Medical
- Audio/video switches
- Digital Cross-Connects
- Low-Voltage
- Multi-Line E1 Interface Cards
- Voice over IP/DSL – Integrated Access Devices, Smart
- Audio and video switching
- MP3 players
