ADG904BCPZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 20-WFQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Max Power Dissipation | 2.75μW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Frequency | 2.5GHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADG904 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.75V |
| Number of Channels | 4 |
| Interface | Parallel |
| Number of Circuits | 1 |
| Max Supply Voltage | 2.75V |
| Min Supply Voltage | 1.65V |
| Test Frequency | 100MHz |
| Power Dissipation | 2.75μW |
| Turn On Delay Time | 8.5 ns |
| Logic Function | Multiplexer |
| Number of Inputs | 4 |
| Supply Type | Single |
| Bandwidth | 2.5 GHz |
| Turn-Off Delay Time | 13 ns |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 37 dB |
| Current - Leakage (IS(off)) (Max) | 1μA |
| Channel Capacitance (CS(off), CD(off)) | 2pF |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 10ns, 16ns |
| Insertion Loss (dB) | 0.4 dB |
| Crosstalk | -58dB @ 100MHz |
| Voltage - Supply, Single (V+) | 1.65V~2.75V |
| P1dB | 16 dBm |
| Length | 4mm |
| Width | 3.75mm |
| Thickness | 850μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG904BCPZ-REEL7 Overview
As the electronic part is packed in 20-WFQFN Exposed Pad, CSP, international shipping is convenient. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. This analog switch is mounted in Surface Mount. Multiplexers and demultiplexers have a number of circuits 4:1. The operating temperature is extended to around -40°C~85°C TA. Total terminations are 20. A 4 channel electronic part produces high-quality output. If the voltage supply is 2.5V volts, the electrical component should be turned on and run. As part of its design, the 20 series is equipped with this electronic component. Unlike digital switches, these are based on SP4T switching circuits. There are 1 circuits in this switch device. Search with ADG904 if you are looking for analog multiplexer variants. The datasheets for the 20 pins explain the functions. A voltage higher than 2.75V should not normally be supplied to the switches. An effective Single supply digital multiplexer. 1.65V is the lowest voltage that should be fed to the electronic electronic part. This analogue multiplexer requires a voltage of 1.65V~2.75V when it drains from a single voltage supply. This electrical part is compatible with 2.75V operating voltages. Operating the 4 inputs requires 4 inputs. 2.5 GHz bandwidths enable data to be transferred.
ADG904BCPZ-REEL7 Features
4 Channels
Switch Circuit: SP4T
Bandwidth: 2.5 GHz
ADG904BCPZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG904BCPZ-REEL7 Analog Switches & Multiplexers ICs applications.
- Precision data acquisition
- Ultrasound
- Industrial and process control systems
- T1/E1 Terminals
- RGB switches
- DSUs
- Fiber to the Home
- Battery Powered Systems
- Relay replacements
- Battery Powered Instruments
