ADG904BRU
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG904 |
| Pin Count | 20 |
| Number of Outputs | 4 |
| Operating Supply Voltage | 2.75V |
| Number of Channels | 4 |
| Number of Circuits | 1 |
| Max Supply Voltage | 2.75V |
| Min Supply Voltage | 1.65V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Power Dissipation | 2.75μW |
| Bandwidth | 2.5 GHz |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 37 dB |
| Current - Leakage (IS(off)) (Max) | 1μA |
| Channel Capacitance (CS(off), CD(off)) | 2pF |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 10ns, 16ns |
| Crosstalk | -58dB @ 100MHz |
| Voltage - Supply, Single (V+) | 1.65V~2.75V |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
ADG904BRU Overview
The electronic component is convenient to ship overseas because it is packed in a 20-TSSOP (0.173, 4.40mm Width). High reliability is ensured by the advanced packaging method Tube. It is mounted in the position Surface Mount. Multiplexers and demultiplexers have a ratio of 4:1. Operating temperature extended to -40°C~85°C TA. Totally, there are 20 terminations. This electronic part offers high-quality output due to its 4 channels. When the electronic component is given a voltage of 2.5V, it should be turned on and run. As part of its design, the 20 series is equipped with this electronic component. Unlike digital switches, these are based on SP4T switching circuits. There are 1 circuits in this switch device. Try searching with ADG904 to find analog multiplexer variants. The datasheets for the 20 pins explain the functions. An abnormal situation would be for the switch device to be supplied with a voltage greater than 2.75V. The lowest voltage the electronic part should receive is 1.65V. This analogue multiplexer requires a voltage of 1.65V~2.75V when it drains from a single voltage supply. Integrated with SINGLE-ENDED MULTIPLEXER analog IC. There is a voltage range of 2.75V operating voltages for the electrical part. The data can be transferred over a wide range of bandwidths, called 2.5 GHz bandwidths. There are 4 outputs on the analogue multiplexer.
ADG904BRU Features
4 Channels
Switch Circuit: SP4T
Bandwidth: 2.5 GHz
ADG904BRU Applications
There are a lot of Analog Devices Inc. ADG904BRU Analog Switches & Multiplexers ICs applications.
- FTTH
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- PBXs
- Communication systems
- Central office
- Microprocessor Controlled Analog Systems
- Imaging
- RGB switches
- Fault Tolerant Systems
- Industrial control systems
