ADG904BRU-REEL7
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG904 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.75V |
| Number of Channels | 4 |
| Number of Circuits | 1 |
| Max Supply Voltage | 2.75V |
| Min Supply Voltage | 1.65V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Number of Inputs | 4 |
| Bandwidth | 2.5 GHz |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 37 dB |
| Current - Leakage (IS(off)) (Max) | 1μA |
| Channel Capacitance (CS(off), CD(off)) | 2pF |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 10ns, 16ns |
| Crosstalk | -58dB @ 100MHz |
| Voltage - Supply, Single (V+) | 1.65V~2.75V |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | Non-RoHS Compliant |
ADG904BRU-REEL7 Overview
As the electronic part is packed in 20-TSSOP (0.173, 4.40mm Width), international shipping is convenient. This packaging method provides high reliability because it uses advanced packaging techniques. This analog switch is mounted in Surface Mount. 4:1 is the ratio between multiplexers and demultiplexers. Operational temperature extended around -40°C~85°C TA. In total, there have been 20 terminations. A 4 channel electronic part produces high-quality output. A 2.5V voltage supply should turn on and run the electronic component. This electronic part can be found in the 20 series. The analog switch ics are built using SP4T switching circuits. There are 1 circuits in this switch device. Use ADG904 to search for variants of the digital switches. The datasheets for the 20 pins explain the functions. In a normalsituation, users should not supply the switches with voltage higher than 2.75V. There should be 1.65V voltage fed to the electrical part below 1.65V. A voltage of 1.65V~2.75V is required to drain this analog switch from a single voltage supply. With a SINGLE-ENDED MULTIPLEXER analog IC integrated into the board. There is a voltage range of 2.75V operating voltages for the electrical part. The 4 inputs need to be operated in order to work. There are various bandwidths available for data transfer.
ADG904BRU-REEL7 Features
4 Channels
Switch Circuit: SP4T
Bandwidth: 2.5 GHz
ADG904BRU-REEL7 Applications
There are a lot of Analog Devices Inc. ADG904BRU-REEL7 Analog Switches & Multiplexers ICs applications.
- SONET
- Signal routing between systems
- DSLAMs
- Sample hold systems
- Private Branch Exchange (PBX)
- Automatic test equipment
- Multi-Line E1 Interface Cards
- Digital cross connects (DSX-1)
- Precision test equipment
- Multiplexers
