Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 3 weeks ago) |
Mounting Type |
Surface Mount |
Package / Case |
20-TSSOP (0.173, 4.40mm Width) |
Surface Mount |
YES |
Number of Pins |
20 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
ECCN Code |
EAR99 |
Terminal Finish |
Matte Tin (Sn) |
Max Power Dissipation |
2.75μW |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
2.5V |
Terminal Pitch |
0.65mm |
Frequency |
2.5GHz |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
ADG904 |
Pin Count |
20 |
Operating Supply Voltage |
2.75V |
Number of Channels |
4 |
Interface |
Parallel |
Number of Circuits |
1 |
Max Supply Voltage |
2.75V |
Min Supply Voltage |
1.65V |
Test Frequency |
100MHz |
Analog IC - Other Type |
SINGLE-ENDED MULTIPLEXER |
Nominal Supply Current |
100nA |
Power Dissipation |
2.75μW |
Turn On Delay Time |
8.5 ns |
Number of Inputs |
4 |
Bandwidth |
2.5 GHz |
Turn-Off Delay Time |
13 ns |
Multiplexer/Demultiplexer Circuit |
4:1 |
Off-state Isolation-Nom |
37 dB |
Current - Leakage (IS(off)) (Max) |
1μA |
Channel Capacitance (CS(off), CD(off)) |
2pF |
Switch Circuit |
SP4T |
Switch Time (Ton, Toff) (Max) |
10ns, 16ns |
Insertion Loss (dB) |
0.4 dB |
Crosstalk |
-58dB @ 100MHz |
Voltage - Supply, Single (V+) |
1.65V~2.75V |
P1dB |
16 dBm |
Height |
1.05mm |
Length |
6.6mm |
Width |
4.5mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ADG904BRUZ Overview
Due to its 20-TSSOP (0.173, 4.40mm Width) packaging, the electronic part is convenient for international shipping. High reliability is provided by advanced packaging method Tube. In Surface Mount, you'll find this switch device. 4:1 is the ratio between multiplexers and demultiplexers. Around -40°C~85°C TA is the extended operating temperature. Total terminations are 20. As a result of its 4 channels, this electronic component provides high-quality output. When a voltage supply of 2.5V is used, the electronic component should be turned on and run. A total of 20 pins are injected into the electrical part body. These analog multiplexers are built based on SP4T switching circuits. The multiplexer consists of 1 circuits. Try searching with ADG904 to find analog multiplexer variants. Datasheets for 20 pin functions are available upon request. Users shouldn't supply more than 2.75V voltage to the switch device. There should be 1.65V voltage fed to the electrical part below 1.65V. This analog switch requires a voltage of 1.65V~2.75V to drain from a single voltage supply. An analog IC with the number SINGLE-ENDED MULTIPLEXER is integrated into this board. The electrical part can be operated at 2.75V voltage levels. Operating the 4 inputs requires 4 inputs. There are various bandwidths available for data transfer.
ADG904BRUZ Features
4 Channels
Switch Circuit: SP4T
Bandwidth: 2.5 GHz
ADG904BRUZ Applications
There are a lot of Analog Devices Inc. ADG904BRUZ Analog Switches & Multiplexers ICs applications.
- Cellular phones
- Audio and video signal routing
- Access Concentrators
- Wireless Local Loop
- Industrial
- Digital Cross-Connects
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Precision instrumentation
- T1/E1 Terminals
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8