ADG904BRUZ-R
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 2.75μW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Frequency | 2GHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG904 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.75V |
| Number of Channels | 4 |
| Interface | Parallel |
| Number of Circuits | 1 |
| Max Supply Voltage | 2.75V |
| Min Supply Voltage | 1.65V |
| Test Frequency | 100MHz |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Power Dissipation | 2.75μW |
| Turn On Delay Time | 8.5 ns |
| Number of Inputs | 4 |
| Bandwidth | 2.5 GHz |
| Turn-Off Delay Time | 13 ns |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 37 dB |
| Current - Leakage (IS(off)) (Max) | 1μA |
| Channel Capacitance (CS(off), CD(off)) | 2pF |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 10ns, 16ns |
| Insertion Loss (dB) | 0.4 dB |
| Crosstalk | -58dB @ 100MHz |
| Voltage - Supply, Single (V+) | 1.65V~2.75V |
| P1dB | 16 dBm |
| Height | 1.2mm |
| Length | 6.6mm |
| Width | 4.5mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG904BRUZ-R Overview
The electrical component comes in 20-TSSOP (0.173, 4.40mm Width) packaging, which makes it convenient to ship overseas. This packaging method provides high reliability because it uses advanced packaging techniques. It is mounted in the position Surface Mount. 4:1 is the ratio of multiplexer to demultiplexer circuits. Operation at a temperature around -40°C~85°C TA. The total number of terminations is 20. The electronic part delivers high-quality output through its 4 channels. In the case of a voltage supply of 2.5V volts, the electrical part can be powered up and run. This electrical component is included in the 20 series of products. Circuits based on SP4T switching are used to construct these analog switch ics. Circuits number 1 make up this analogue multiplexer. Using the ADG904 search parameter, you can discover variants of the switch. For details about the functions of 20 pins, please refer to the datasheets. Users shouldn't supply more than 2.75V voltage to the switch device. It is recommended that the electrical component receives a voltage of 1.65V. The voltage required by this switch device is 1.65V~2.75V, draining from a single voltage supply. With a SINGLE-ENDED MULTIPLEXER analog IC integrated into the board. There is a voltage range of 2.75V operating voltages for the electrical part. It is possible to operate 4 inputs. 2.5 GHz bandwidths enable data to be transferred.
ADG904BRUZ-R Features
4 Channels
Switch Circuit: SP4T
Bandwidth: 2.5 GHz
ADG904BRUZ-R Applications
There are a lot of Analog Devices Inc. ADG904BRUZ-R Analog Switches & Multiplexers ICs applications.
- Fiber In The Loop (FITL)
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Video signal routing
- Cell phones
- Optical Applications
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Microprocessor Controlled Analog Systems
- Video switching
- Battery-powered systems
- Medical Instrumentation
