ADG904SCPZ-EP
| Parameters | |
|---|---|
| Output | SEPARATE OUTPUT |
| Pin Count | 20 |
| Operating Supply Voltage | 2.75V |
| Number of Channels | 4 |
| Interface | Parallel |
| Number of Circuits | 1 |
| Test Frequency | 100MHz |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Input Voltage (Min) | 0.7V |
| Bandwidth | 2.5 GHz |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 37 dB |
| Current - Leakage (IS(off)) (Max) | 1μA |
| Channel Capacitance (CS(off), CD(off)) | 2pF |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 10ns, 16ns |
| Insertion Loss (dB) | 0.4 dB |
| Crosstalk | -58dB @ 100MHz |
| Voltage - Supply, Single (V+) | 1.65V~2.75V |
| P1dB | 16 dBm |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tray |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ADG904 |
ADG904SCPZ-EP Overview
This electronic part is conveniently packaged in 20-WFQFN Exposed Pad, making it easy to ship abroad. In order to provide high reliability, an advanced packaging method Tray is used. Surface Mount is where this multiplexer is located. 4:1 is the number of circuits in the multiplexer and demultiplexer. Operating temperature around -55°C~125°C TA extended. In total, there have been 20 terminations. A high-quality output is provided by the electrical component's 4 channels. When a voltage supply of 2.5V is used, the electronic component should be turned on and run. An injection of 20 pins is performed into the body of the electrical component. On the other hand, analog switches can be constructed using SP4T switching circuits. The multiplexer consists of 1 circuits. Try searching for ADG904 variants of the analog switch ic. To find out what the 20 pins do, please refer to the datasheets. Using a single voltage supply, this switch device consumes 1.65V~2.75V volts. An analog IC with the number SINGLE-ENDED MULTIPLEXER is integrated into this board. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them. Operating voltages of 2.75V are compatible with the electrical part. There are 2.5 GHz bandwidths for data transfer.
ADG904SCPZ-EP Features
4 Channels
Switch Circuit: SP4T
Bandwidth: 2.5 GHz
ADG904SCPZ-EP Applications
There are a lot of Analog Devices Inc. ADG904SCPZ-EP Analog Switches & Multiplexers ICs applications.
- Digital Cross-Connects
- PBXs
- PDAs
- ISDN NT1/TA
- Communications systems
- High speed data transmission line cards
- Audio and video routing
- Audio and video switching
- FTTH
- Channelized and Unchannelized DS3 applications
