ADG904SCPZ-EP-RL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ADG904 |
| Output | SEPARATE OUTPUT |
| Pin Count | 20 |
| Operating Supply Voltage | 2.75V |
| Number of Channels | 4 |
| Interface | Parallel |
| Number of Circuits | 1 |
| Test Frequency | 100MHz |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Input Voltage (Min) | 0.7V |
| Bandwidth | 2.5 GHz |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 37 dB |
| Current - Leakage (IS(off)) (Max) | 1μA |
| Channel Capacitance (CS(off), CD(off)) | 2pF |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 10ns, 16ns |
| Insertion Loss (dB) | 0.4 dB |
| Crosstalk | -58dB @ 100MHz |
| Voltage - Supply, Single (V+) | 1.65V~2.75V |
| P1dB | 16 dBm |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG904SCPZ-EP-RL7 Overview
Shipping overseas is convenient due to the electrical component's packing in 20-WFQFN Exposed Pad. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. This analog switch is mounted in Surface Mount. In the multiplexer and demultiplexer, 4:1 represents the number of circuits. Operation at a temperature around -55°C~125°C TA. Total terminations are 20. As a result of its 4 channels, this electronic component provides high-quality output. It is safe to turn on and run the electronic component with a 2.5V voltage supply. An electrical component of this type can be found in the 20 series. Circuits based on SP4T switching are used to construct these analog switch ics. A 1 circuit is present in this switch device. Try searching with ADG904 to find analog multiplexer variants. Datasheets for functions of 20 pins are available. This analogue multiplexer requires a voltage of 1.65V~2.75V when it drains from a single voltage supply. It is integrated with SINGLE-ENDED MULTIPLEXER analog ICs. The analog switch ic utilizes SEPARATE OUTPUT outputs in total. 2.75V operating voltages can be used with this electrical part. It is possible to transfer data over a 2.5 GHz-bandwidth.
ADG904SCPZ-EP-RL7 Features
4 Channels
Switch Circuit: SP4T
Bandwidth: 2.5 GHz
ADG904SCPZ-EP-RL7 Applications
There are a lot of Analog Devices Inc. ADG904SCPZ-EP-RL7 Analog Switches & Multiplexers ICs applications.
- Optical Applications
- SDH/SONET multiplexers
- Avionics test equipment
- Communications systems
- E1 Network Equipment
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- New designs requiring multiplexer functions
- Cellular phones
- Wireless Local Loop
- Isolation
