ADG918BRMZ-500RL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | RF/Microwave Switches |
| Max Power Dissipation | 2.5μW |
| Technology | CMOS |
| Voltage - Supply | 1.65V~2.75V |
| Number of Functions | 1 |
| Construction | COMPONENT |
| Frequency | 2GHz |
| Base Part Number | ADG918 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Operating Supply Voltage | 2.75V |
| Circuit | SPDT |
| Interface | Parallel |
| Test Frequency | 1GHz |
| Power Dissipation | 2.5μW |
| Number of Bits | 1 |
| Turn On Delay Time | 6.6 ns |
| Topology | Absorptive |
| Bandwidth | 4 GHz |
| Turn-Off Delay Time | 6.5 ns |
| -3db Bandwidth | 4 GHz |
| Frequency Range | DC~2GHz |
| RF/Microwave Device Type | DIVERSITY SWITCH |
| Isolation | 37dB |
| Insertion Loss (dB) | 0.8 dB |
| RF Type | General Purpose |
| Characteristic Impedance | 50Ohm |
| P1dB | 17dBm |
| IIP3 | 36dBm |
| On Time-Nom | 0.0066 μs |
| Port Termination | ABSORP/REFLECTIVE |
| Height | 950μm |
| Length | 3.2mm |
| Width | 3.2mm |
| Thickness | 850μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG918BRMZ-500RL7 Overview
As a result of the use of the Tape & Reel (TR) package, the performance of the RF Switches are optimized.There are 8 terminations in this RF Switch.When operating, RF Switch's operating temperature should be kept at -40°C~85°C.I would like to point out that this RF light switch belongs to the RF/Microwave Switches subcategory.High power RF switchs of this type are part of the ADG918 family of high power RF switch 12vs.There are 8 pins used for high power RF switch operation.RF Type General Purpose from the RF switch ic.The RF Switch can supply 1.65V~2.75V voltage.
ADG918BRMZ-500RL7 Features
Tape & Reel (TR) package
8 terminations
RF/Microwave Switches subcategory
ADG918 family
8 pins
General Purpose RF Type
ADG918BRMZ-500RL7 Applications
There are a lot of Analog Devices Inc. ADG918BRMZ-500RL7 RF Switches applications.
- IF switching
- Tablets
- Antenna diversity switching
- Mobile devices
- Dual-band applications
- Digital transceiver front end switch
- ISM
- Smartphones
- High speed filter selection
- Tuner modules
