ADGS1408BCPZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 24-VFQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C |
| Packaging | Tray |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Pin Count | 24 |
| JESD-30 Code | S-XQCC-N24 |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Input Voltage (Min) | -5V |
| Input Voltage (Max) | 5V |
| Voltage - Supply, Single/Dual (±) | 12V ±15V |
| Supply Current-Max (Isup) | 0.02mA |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| -3db Bandwidth | 60MHz |
| On-State Resistance (Max) | 4.7Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | -64 dB |
| Current - Leakage (IS(off)) (Max) | 200pA |
| Channel Capacitance (CS(off), CD(off)) | 14pF 80pF |
| On-state Resistance Match-Nom | 0.3Ohm |
| Switch Time (Ton, Toff) (Max) | 165ns, 155ns |
| Charge Injection | 50pC |
| Channel-to-Channel Matching (ΔRon) | 200m Ω |
| Crosstalk | -70dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 570ns |
| Switch-off Time-Max | 400ns |
| Signal Current-Max | 48.9A |
| Length | 4mm |
| RoHS Status | ROHS3 Compliant |
ADGS1408BCPZ Overview
Packed in 24-VFQFN Exposed Pad, CSP, the electronic component is convenient for shipping overseas. To ensure high reliability, a new packaging method Tray is used. Multiplexers like this are mounted in the Surface Mount position. In the multiplexer and demultiplexer, 8:1 represents the number of circuits. An extended operating temperature of -40°C~125°C degrees Celsius. In total, there are 24 terminations. The electronic part delivers high-quality output through its 8 channels. When the electronic component is given a voltage of 5V, it should be turned on and run. There are 24 pins injected into the electronic part body. The multiplexer consists of 1 circuits. Integrated with an analog IC SINGLE-ENDED MULTIPLEXER.
ADGS1408BCPZ Features
8 Channels
-3db Bandwidth: 60MHz
ADGS1408BCPZ Applications
There are a lot of Analog Devices Inc. ADGS1408BCPZ Analog Switches & Multiplexers ICs applications.
- PBX interfaces
- Data Acquisition Systems
- Voice over IP/DSL – Integrated Access Devices, Smart
- Cable Modem
- PCMCIA cards
- Video signal routing
- DSUs
- Cellular phones
- Remote Powered Equipment
- New designs requiring multiplexer functions
