ADL5310ACP-R2
| Parameters | |
|---|---|
| Lifecycle Status | OBSOLETE (Last Updated: 4 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-VFQFN Exposed Pad, CSP |
| Number of Pins | 24 |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Logarithmic Converter |
| Resistance | 35MOhm |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Applications | Fiber Optics |
| Subcategory | Other Analog ICs |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADL5310 |
| Pin Count | 24 |
| Operating Supply Voltage | 5V |
| Number of Elements | 6 |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 9.5mA |
| Nominal Supply Current | 9.5mA |
| Power Dissipation | 500mW |
| Quiescent Current | 9.5mA |
| Input Offset Voltage (Vos) | 20mV |
| Bandwidth | 15MHz |
| Supply Current-Max (Isup) | 11.5mA |
| Max Dual Supply Voltage | 5.5V |
| Min Dual Supply Voltage | 1.5V |
| Input Bias Current | 400nA |
| Height Seated (Max) | 1mm |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
ADL5310ACP-R2 Overview
Housed in a Cut Tape (CT) package.A very good Logarithmic Converter that comes at a very good price and offers excellent value for money.It was sent with the 24-VFQFN Exposed Pad, CSP package.In the Surface Mount direction, the part is mounted.Fiber Optics mainly uses it.The device's base part number is ADL5310.Here we are using 2 functions to access a high level of performance that can be used for amplifying purposes.24 terminals are present in total, each of which has its own purpose.Under 240, the iron temperature should be controlled when the peak relow is being performed for the part.It contains 24 pins in total.In order for this amplifier to operate properly, I would recommend a supply voltage of 5V.You can use this 24-pin amplifier to meet your custom requirements for a variety of applications.This device can be operated down to a temperature of as low as -40°C, which is the lowest temperature it can reach.The impressive thing about this part is that it is capable of running at temperatures up to 85°C degrees Fahrenheit.This product incorporates Surface Mount in order to enhance design flexibility.As with other high-quality Other Analog ICss, it has a marvellous amplification power.A maximum supply voltage of 12V is specified.At least 3V power must be supplied with this item.With this video processing device, you can achieve amazing performance by combining 2 channels together.5V can be used to supply this device.Power supplies for the part must be 5V-type.The 35MOhm resistance of this amplifier is specified.It is recommended that the supply current be set to 9.5mA in order to keep the amplifier working normally.Amplification is performed by using 6 basic elements.
ADL5310ACP-R2 Features
ADL5310ACP-R2 Applications
There are a lot of Analog Devices Inc. ADL5310ACP-R2 Special Purpose Amplifiers applications.
- Precision measurement
- Navigation
- PDA
- Scintillation detectors
- Multiplication and division circuits
- Hand-held batteries
- Oscilloscopes
- Test and measurement instruments
- Communication device
- Voltage regulation circuit
