ADM101EARMZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Subcategory | Line Driver or Receivers |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADM101 |
| Pin Count | 10 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Operating Supply Current | 1mA |
| Nominal Supply Current | 2.5mA |
| Max Supply Current | 2.5mA |
| Logic Function | Receiver, Transceiver |
| Data Rate | 460Kbps |
| Differential Output | NO |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Full |
| Receiver Hysteresis | 200mV |
| Interface Standard | EIA-232 |
| Number of Transceivers | 1 |
| ESD Protection | Yes |
| Receive Delay-Max | 5000 ns |
| Simplex/Duplex | Full Duplex |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADM101EARMZ-REEL7 Overview
Due to the enhanced 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, this driver IC is excellent for driving common LEDs.The Tape & Reel (TR) package houses this receiver.It has proved to be a valuable component for a variety of applications since it is a Transceiver can transceiver.You can place this wide receiver to any Surface Mount-type PCB or development board.This differential driver consumes 4.5V~5.5V for its power supplyAs many as 1/1 eligible receivers/drivers can be used simultaneously with this electronic part.IC receiver's like this are designed for applications requiring a -40°C~85°C operating temperature.This line driver ic can operate efficiently with a supply voltage range of 5V.This wide receiver has 10 terminations for driving and receiving data signals.A package consisting of 10 market standard pinouts is provided with this integrated circuit.This part number ADM101 can be used to search for more variants based on the product type, temperature, package, etc.A 10-pin driver IC with enhanced power dissipation control is featured here.In this ic receiver, the resolution was able to be set to a maximum of 1 bits.This receiver is typically specified with a resolution of 1 bits. There are two types of input voltage supply available for this IC, 5V.There is a subcategory named Line Driver or Receivers for this rf transceiver module.There is one driver IC in this package which is intended to be operated by 5V of power.This IC implements 1 transceivers overall.This integrating circuit is able to drive LEDs with an input voltage of 1mA.In the case of input current exceeding 2.5mA, this can transceiver may malfunction.
ADM101EARMZ-REEL7 Features
Tape & Reel (TR) package
10 pin count
10 pins
5V power supply
ADM101EARMZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADM101EARMZ-REEL7 Drivers/Receivers/Transceivers applications.
- Satellite communications networks
- Thermal management
- 1x/2x Fiber Channel
- Satellite radio receiver
- Carrier phase observations
- Servers
- AV receiver
- Wireless projection application for conferences
- Desktop PC
- Ethernet circuitry
