Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 3 weeks ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
48-TQFP |
Number of Pins |
48 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tray |
Series |
Super Sequencer® |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
48 |
Termination |
SMD/SMT |
ECCN Code |
EAR99 |
Type |
Sequencer |
Terminal Finish |
Matte Tin (Sn) |
HTS Code |
8542.39.00.01 |
Subcategory |
Power Management Circuits |
Terminal Position |
QUAD |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Terminal Pitch |
0.5mm |
Frequency |
400kHz |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
ADM1064 |
Output |
Programmable |
Pin Count |
48 |
Power Supplies |
3/5V |
Number of Channels |
10 |
Max Supply Voltage |
14.4V |
Min Supply Voltage |
3V |
Operating Supply Current |
4.2mA |
Nominal Supply Current |
4.2mA |
Max Supply Current |
6mA |
Adjustable Threshold |
NO |
Watchdog Timer |
Yes |
Voltage - Threshold |
Adjustable/Selectable |
Number of Voltages Monitored |
10 |
Resolution |
1.5 B |
Min Reset Threshold Voltage |
573mV |
Max Reset Threshold Voltage |
1.375V |
Undervoltage Threshold |
6V |
Overvoltage Threshold |
8.4V |
Height |
1mm |
Length |
7mm |
Width |
7mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ADM1064ASUZ Overview
There are 48 terminals on this power management that allow it to be mounted. Power management is packaged in a Tray way. There are 1 functions included in this PMIC so that you can refer to them. This power managment ic consists of 10 channels, each of which can be used independently. For your reference, this PMIC includes a list of 48-TQFP functions. There are a lot of similarities between this IC power and other Sequencer products. The package peak reflow temperature is specified to be 260. A supply voltage of 10 is used to conduct the PMIC chip. Using Surface Mount, IC management is mounted. A IC power such as this can be classified as a Power Management Circuits power management system. 48 pins are present in total in this power management. The pins of the power management system count 48. A voltage (Vsup) that doesn't fall below 3V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. The supply voltage (Vsup) should not exceed 14.4V volts in this IC power. The recommended mounting type is Surface Mount. This power management is the recommended temperature range for the supervisors: -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Programmable. It is estimated that the voltage supervisor's supply current is 4.2mA. If you want to search for similar IC managements of this manufacturer, you can always refer to ADM1064, which is the base power ics number. In order to operate this power management, it requires 3/5V volts of power. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 6mA. The IC power that you are looking at comes from our well-known Super Sequencer? series product line. Generally, this IC management works at a frequency of 400kHz, which is sufficient for most applications.
ADM1064ASUZ Features
Sequencer type
Minimum supply voltage of 3V
4.2mA operating supply current
ADM1064ASUZ Applications
There are a lot of Analog Devices Inc. ADM1064ASUZ Voltage Supervisors applications.
- Linux and server computing
- Detection of phase sequence
- Kitchen appliances
- Battery cars
- Detection of phase loss
- Refrigeration
- Urban rail transit weak current power monitoring
- Electronics installed in the vehicle
- Multi-voltage system
- Display equipment