ADM1065ACPZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 40-VFQFN Exposed Pad, CSP |
| Number of Pins | 40 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | Super Sequencer® |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 40 |
| ECCN Code | EAR99 |
| Type | Sequencer |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADM1065 |
| Output | Programmable |
| Pin Count | 40 |
| Power Supplies | 3/14V |
| Number of Channels | 10 |
| Max Supply Voltage | 14.4V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 4.2mA |
| Max Supply Current | 6mA |
| Adjustable Threshold | YES |
| Watchdog Timer | Yes |
| Voltage - Threshold | Adjustable/Selectable |
| Number of Voltages Monitored | 10 |
| Min Reset Threshold Voltage | 573mV |
| Max Reset Threshold Voltage | 1.375V |
| Undervoltage Threshold | 6V |
| Overvoltage Threshold | 8.4V |
| Height | 950μm |
| Length | 6mm |
| Width | 5.75mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADM1065ACPZ Overview
There are 40 mounting terminals on the voltage supervisor, each of which has a different function. Packaged in a Tray-shape, IC management comes with a number of features. In this IC power you will find 1 functions for you to refer to. On this supervisor, there is a series of 10 channels that can be found. In this PMIC, you can find 40-VFQFN Exposed Pad, CSP functions for your reference. It is a IC power that shares many benefits with other products from the Sequencer line. During the reflow process, a peak temperature of 260 is specified for the package. In a 10 supply voltage, the PMIC chip conducts. Surface Mount mounts power management on the wall. It is possible to subcategorize this power ic as a Power Management Circuits chip. The total number of pins on this power management is 40. The pins of the power management system count 40. A voltage (Vsup) that doesn't fall below 3V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. There should be no more than 14.4V volts of maximum supply voltage (Vsup) in this power management. The recommended mounting type is Surface Mount. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. Power management has an output of Programmable during operation. Supplied with a operating current of 4.2mA, this PMIC is capable of fully function as specified. It is always advisable to use ADM1065, the base supervisor number, when searching for similar PMICs from the manufacturer. To operate this power management, you will need at least 3/14V volts of power. Voltage supervisor can work with a supply temperature of 6mA at the most. As you may know, this PMIC comes from the well-known Super Sequencer? series product line.
ADM1065ACPZ Features
Sequencer type
Minimum supply voltage of 3V
4.2mA operating supply current
ADM1065ACPZ Applications
There are a lot of Analog Devices Inc. ADM1065ACPZ Voltage Supervisors applications.
- Set top box
- Digitally controlled LDO regulators circuit
- DSP
- Microcontroller system
- Efficient information transmission
- Detection of phase imbalance
- Automotive power systems
- Transformer load monitoring equipment
- Data storage applications
- Electrical fire monitoring system
