ADM1065ASUZ
| Parameters | |
|---|---|
| Output | Programmable |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Power Supplies | 3/14V |
| Number of Channels | 10 |
| Max Supply Voltage | 14.4V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 4.2mA |
| Max Supply Current | 6mA |
| Adjustable Threshold | YES |
| Watchdog Timer | Yes |
| Voltage - Threshold | Adjustable/Selectable |
| Number of Voltages Monitored | 10 |
| Min Reset Threshold Voltage | 573mV |
| Max Reset Threshold Voltage | 1.375V |
| Undervoltage Threshold | 6V |
| Overvoltage Threshold | 8.4V |
| Height | 1.05mm |
| Length | 9mm |
| Width | 7mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TQFP |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | Super Sequencer® |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Type | Sequencer |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Frequency | 400kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADM1065 |
ADM1065ASUZ Overview
A total of 48 terminals are used to mount this power management. Packaged in the form of a Tray, power management is easy to use. In this PMIC, you can find 1 functions for your reference. This power managment ic consists of 10 channels, each of which can be used independently. In this IC management you will find 48-TQFP functions for you to refer to. Several of the benefits of this PMIC are also shared by other Sequencer products. As specified in the package specification, the peak reflow temperature of the package is set at 260. There is a voltage supply of 10 for the PMIC chip, and the chip conducts at that voltage. Using Surface Mount, IC management is mounted. A IC power such as this can be classified as a Power Management Circuits power management system. The total number of pins on this power management is 48. 48 pins are on the supervisor. IC management can only work with a supply voltage of 3V volts. The maximum supply voltage (Vsup) in this PMIC should not exceed 14.4V volts. A Surface Mount mounting type is recommended. This power management is the recommended temperature range for the supervisors: -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Programmable. In order to maintain a stable supply current for the power management, 4.2mA is the recommended value. To find similar IC managements from the manufacturer, you can always search by ADM1065. The voltage supervisor requires a power source of 3/14V volts in order to work correctly. The maximum supply temperature voltage supervisor can handle is 6mA. Located in the well-known Super Sequencer? series product line, this IC management is a kind of this series. As a general rule, this IC management is designed to function at a frequency of 400kHz, which is sufficient for most applications.
ADM1065ASUZ Features
Sequencer type
Minimum supply voltage of 3V
4.2mA operating supply current
ADM1065ASUZ Applications
There are a lot of Analog Devices Inc. ADM1065ASUZ Voltage Supervisors applications.
- Analog circuit
- Detection of phase sequence
- Insulation fault location system
- Fire equipment power monitoring system
- Detection of phase imbalance
- Set top box
- Electrical fire monitoring system
- FPGA design
- Functional modules
- Battery-powered equipment
