ADM1066ACPZ
| Parameters | |
|---|---|
| Min Reset Threshold Voltage | 573mV |
| Max Reset Threshold Voltage | 1.375V |
| Undervoltage Threshold | 6V |
| Overvoltage Threshold | 8.4V |
| Number of Monitored Inputs | 10 |
| Height | 980μm |
| Length | 6mm |
| Width | 6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 40-VFQFN Exposed Pad, CSP |
| Number of Pins | 40 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | Super Sequencer® |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 40 |
| ECCN Code | EAR99 |
| Type | Sequencer |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Power Management Circuits |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADM1066 |
| Output | Programmable |
| Pin Count | 40 |
| Power Supplies | 3/5V |
| Number of Channels | 10 |
| Max Supply Voltage | 14.4V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 4.2mA |
| Max Supply Current | 6mA |
| Adjustable Threshold | YES |
| Watchdog Timer | Yes |
| Voltage - Threshold | Adjustable/Selectable |
| Number of Voltages Monitored | 12 |
| Resolution | 1.5 B |
ADM1066ACPZ Overview
There are 40 terminals connected to this power management, which makes it easy to mount. There is a Tray-packaging method applied to IC management. There are 1 functions included in this PMIC so that you can refer to them. A series of 10 channels can be found on this supervisor. To assist you, this PMIC includes 40-VFQFN Exposed Pad, CSP functions. It is a IC power that shares many benefits with other products from the Sequencer line. Packages are specified to have an average peak reflow temperature of 260. A supply voltage of 2.7V is used to conduct the PMIC chip. Power management conducts at a voltage of 12. By Surface Mount, IC management has been mounted. The power management system can be categorized as a Power Management Circuits chip. The total number of pins on this power management is 40. This power management system has 40 pins. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 3V volts. There should be no more than 14.4V volts of supply voltage (Vsup) in this power management. The recommended mounting type is Surface Mount. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. There is an output voltage of Programmable from this supervisor when it is operating. The supply current of the power management is 4.2mA. For similar manage ics search of the manufacturer, you can always refer to ADM1066, the base PMIC number. The voltage supervisor requires a power source of 3/5V volts in order to work correctly. The maximum supply temperature voltage supervisor can handle is 6mA. Supervisors from the well-known Super Sequencer? series product line are featured in this PMIC. There are 10 inputs monitored at once on the power management.
ADM1066ACPZ Features
Sequencer type
Minimum supply voltage of 3V
4.2mA operating supply current
ADM1066ACPZ Applications
There are a lot of Analog Devices Inc. ADM1066ACPZ Voltage Supervisors applications.
- Military electronics
- Electronics installed in the vehicle
- Detection of phase loss
- Important electronics for automotive safety
- DSP
- Power communication system
- Household appliances
- Digitally controlled LDO regulators circuit
- Electrical fire monitoring system
- Efficient information transmission
