ADM1068ASTZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-LQFP |
| Number of Pins | 32 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | Super Sequencer® |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Sequencer |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Frequency | 400kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADM1068 |
| Output | Programmable |
| Pin Count | 32 |
| Qualification Status | Not Qualified |
| Power Supplies | 3/5V |
| Number of Channels | 8 |
| Max Supply Voltage | 14.4V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 4.2mA |
| Nominal Supply Current | 4.2mA |
| Max Supply Current | 6mA |
| Adjustable Threshold | YES |
| Watchdog Timer | Yes |
| Voltage - Threshold | 8 Selectable Threshold Combinations |
| Number of Voltages Monitored | 8 |
| Min Reset Threshold Voltage | 573mV |
| Max Reset Threshold Voltage | 1.375V |
| Undervoltage Threshold | 6V |
| Overvoltage Threshold | 9.6V |
| Height | 1.45mm |
| Length | 7mm |
| Width | 7mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADM1068ASTZ Overview
Power management is mounted through 32 terminals. Tray-packaging is used. The purpose of this IC management is to provide you with a reference of 1 functions. Power management consists of 8 channels, each of which can be used independently. The purpose of this IC power is to provide you with a reference of 32-LQFP functions. With power management, you get a lot of benefits that you won't find in other Sequencer products. IC management is specified that the package peak reflow temperature should be 260. In a 8 supply voltage, the PMIC chip conducts. The power management is mounted by Surface Mount. The power management belongs to the Power Management Circuits subcategory. It has a total of 32 pins that are attached to IC management. 32 pins are present on the power management system. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 3V. The maximum supply voltage (Vsup) in this PMIC should not exceed 14.4V volts. Mounting type Surface Mount is recommended. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. While this power management is operating, it will output Programmable as the output voltage. In order to maintain a stable supply current for the power management, 4.2mA is the recommended value. A similar IC managements number of the manufacturer can always be found by using ADM1068, the base power ics number. It is necessary to have 3/5V volts of power in order for this voltage supervisor to operate. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 6mA. A PMIC from the well-known Super Sequencer? series of products is being offered here. Generally, this IC management works at a frequency of 400kHz, which is sufficient for most applications.
ADM1068ASTZ Features
Sequencer type
Minimum supply voltage of 3V
4.2mA operating supply current
ADM1068ASTZ Applications
There are a lot of Analog Devices Inc. ADM1068ASTZ Voltage Supervisors applications.
- Embedded computing
- Power distribution systems of operating room
- Set top box
- Cloud computing
- Electrical fire monitoring system
- Power communication system
- Precision measurement
- Power distribution systems of CCU
- External alarm
- Automotive permanent magnet synchronous motors
