ADM1069ACPZ
| Parameters | |
|---|---|
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 40 |
| Type | Sequencer |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Number of Functions | 1 |
| Supply Voltage | 4.75V |
| Terminal Pitch | 0.5mm |
| Base Part Number | ADM1069 |
| Output | Programmable |
| Pin Count | 40 |
| Qualification Status | Not Qualified |
| Power Supplies | 4.75V |
| Number of Channels | 8 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 4.2mA |
| Max Supply Current | 6mA |
| Adjustable Threshold | YES |
| Watchdog Timer | Yes |
| Voltage - Threshold | 8 Selectable Threshold Combinations |
| Number of Voltages Monitored | 8 |
| Resolution | 1.5 B |
| Min Reset Threshold Voltage | 573mV |
| Max Reset Threshold Voltage | 1.375V |
| Undervoltage Threshold | 6V |
| Overvoltage Threshold | 8.4V |
| Source Url Status Check Date | 2013-05-01 14:56:39.671 |
| Height | 830μm |
| Length | 6mm |
| Width | 6mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 40-VFQFN Exposed Pad, CSP |
| Number of Pins | 40 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | Super Sequencer® |
| JESD-609 Code | e3 |
| Pbfree Code | no |
ADM1069ACPZ Overview
There are 40 mounting terminals on the voltage supervisor, each of which has a different function. It is packaged with Tray. In this PMIC, you can find 1 functions for your reference. A series of 8 channels can be found on this supervisor. In this PMIC, you can find 40-VFQFN Exposed Pad, CSP functions for your reference. Several of the benefits of this PMIC are also shared by other Sequencer products. IC management conducts at a voltage of 4.75V. During operation, the power ic is supplied with a voltage of 8. The mount is provided by Surface Mount. It is possible to subcategorize this power ic as a Power Management Circuits chip. Power management has a total of 40 pins. 40 pins make up the power management. It is recommended that Vsup should not be less than 3V for this IC power. There should be no more than 6V volts of maximum supply voltage (Vsup) in this power management. The recommended mounting type for IC management is Surface Mount. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. There is an output voltage of Programmable from this supervisor when it is operating. There is a supply current of 4.2mA for the power management. You can always use ADM1069, the base supervisor number, to search for similar PMICs of the manufacturer. In order to operate this power management, it requires 4.75V volts of power. The power management can work with a maximum supply temperature of 6mA. The IC power that you are looking at comes from our well-known Super Sequencer? series product line.
ADM1069ACPZ Features
Sequencer type
Minimum supply voltage of 3V
4.2mA operating supply current
ADM1069ACPZ Applications
There are a lot of Analog Devices Inc. ADM1069ACPZ Voltage Supervisors applications.
- Consumer electronics
- Functional modules
- Urban rail transit weak current power monitoring
- Detection of phase sequence
- Data storage applications
- emergency room
- Satellite navigation
- Detection of phase loss
- Network equipment
- Important electronics for automotive safety
