Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 2 weeks ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
6-TSSOP, SC-88, SOT-363 |
Number of Pins |
6 |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tape & Reel (TR) |
Series |
Simple Sequencers® |
JESD-609 Code |
e4 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
6 |
ECCN Code |
EAR99 |
Type |
Sequencer |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Power Management Circuits |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
ADM1085 |
Output |
Open Drain or Open Collector |
Pin Count |
6 |
Number of Outputs |
1 |
Operating Supply Voltage |
125V |
Power Supplies |
2.5/3.3V |
Number of Channels |
1 |
Max Supply Voltage |
3.6V |
Min Supply Voltage |
2.25V |
Operating Supply Current |
10μA |
Nominal Supply Current |
10μA |
Max Supply Current |
15μA |
Adjustable Threshold |
YES |
Watchdog Timer |
No |
Reset |
Active High |
Reset Timeout |
Adjustable/Selectable |
Min Reset Threshold Voltage |
560mV |
Max Reset Threshold Voltage |
640mV |
Undervoltage Threshold |
560mV |
Overvoltage Threshold |
640mV |
Height |
1.1mm |
Length |
2.2mm |
Width |
1.35mm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ADM1085AKSZ-REEL7 Overview
This voltage supervisor has a total of 6 mounting terminals that can be used for mounting. It is packaged with Tape & Reel (TR). In this PMIC, you can find 1 functions for your reference. On this supervisor, there is a series of 1 channels that can be found. Please find attached 6-TSSOP, SC-88, SOT-363 functions for your reference in this IC power. This IC power shares lots of benefits with other Sequencer products. According to the specification, the package's peak reflow temperature is specified to be 260. There is a voltage supply of 3.3V for the PMIC chip, and the chip conducts at that voltage. The mount is provided by Surface Mount. The power management system can be categorized as a Power Management Circuits chip. There are a total of 6 pins on power management. 6 pins make up the power management. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 2.25V, which is the minimum supply voltage that should be applied. The maximum supply voltage (Vsup) in this PMIC should not exceed 3.6V volts. Power management recommends the Surface Mount mounting type. You should set the supervisor's temperature during -40°C~125°C TA . While in operation, this supervisor has a voltage output of Open Drain or Open Collector. The supervisor's supply current is specified to 10μA. A similar IC managements number of the manufacturer can always be found by using ADM1085, the base power ics number. There is a requirement for 2.5/3.3V power to power this power management. At the most, voltage supervisor can work with a supply temperature of 15μA. Located in the well-known Simple Sequencers? series product line, this IC management is a kind of this series. This IC management's architecture supports 1 outputs.
ADM1085AKSZ-REEL7 Features
Sequencer type
Minimum supply voltage of 2.25V
10μA operating supply current
ADM1085AKSZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADM1085AKSZ-REEL7 Voltage Supervisors applications.
- Magnetic resonance imaging
- Low voltage/high power - AI, GPU
- External alarm
- Computer applications
- Radio
- Functional modules
- emergency room
- Refrigeration
- Smartphones
- Satellite navigation