ADM1185ARMZ-1REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | Sequencer |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADM1185 |
| Output | Open Drain or Open Collector |
| Pin Count | 10 |
| Power Supplies | 3/5V |
| Number of Channels | 4 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 24μA |
| Nominal Supply Current | 80μA |
| Max Supply Current | 80μA |
| Adjustable Threshold | NO |
| Accuracy | 0.8 % |
| Watchdog Timer | No |
| Reset | Active High |
| Voltage - Threshold | Adjustable/Selectable |
| Number of Voltages Monitored | 4 |
| Threshold Voltage | +0.6V |
| Undervoltage Threshold | 600mV |
| Overvoltage Threshold | 2.9V |
| Reset Delay Time | 190 ms |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADM1185ARMZ-1REEL7 Overview
This power management consists of 10 mounting terminals on which it can be mounted. Tape & Reel (TR)-packaging is used. Please refer to this PMIC for 1 functions. On this supervisor, there is a series of 4 channels that can be found. In this IC management you will find 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) functions for you to refer to. As with other Sequencer products, this IC management also offers a wide range of benefits. During the reflow process, a peak temperature of 260 is specified for the package. A supply voltage of 3.3V is used to conduct the PMIC chip. Power ics operate at 4 supply voltages. Power management is included in the Surface Mount mount. Power Management Circuits is a subcategory of this PMIC chip. In total, it has 10 pins on IC management. There are 10 pins on the supervisor. It is recommended that Vsup should not be less than 2.7V for this IC power. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. A Surface Mount mounting type is recommended. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. There is a supply current of 24μA for the power management. For similar manage ics search of the manufacturer, you can always refer to ADM1185, the base PMIC number. There is a requirement for 3/5V power to power this power management. The power management can work with a maximum supply temperature of 80μA.
ADM1185ARMZ-1REEL7 Features
Sequencer type
Minimum supply voltage of 2.7V
24μA operating supply current
ADM1185ARMZ-1REEL7 Applications
There are a lot of Analog Devices Inc. ADM1185ARMZ-1REEL7 Voltage Supervisors applications.
- Battery cars
- Refrigeration
- Military communications
- Digitally controlled LDO regulators circuit
- Power distribution systems of infant care room
- Rechargeable batteries
- Medical-specific insulation monitor
- Functional modules
- Satellite navigation
- Personal computers
