ADM1232ARM-REEL7
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 900mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADM1232 |
| Output | Open Drain, Push-Pull |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 50μA |
| Nominal Supply Current | 500μA |
| Power Dissipation | 900mW |
| Max Supply Current | 500μA |
| Adjustable Threshold | YES |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | Adjustable/Selectable |
| Reset Timeout | 250ms Minimum |
| Threshold Voltage | +4.37/4.62V |
| Undervoltage Threshold | 4.25V |
| Overvoltage Threshold | 4.49V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 1 s |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
ADM1232ARM-REEL7 Overview
It is mounted through 8 terminals on the power management. Packaging is in the form of a Tape & Reel (TR). Please refer to this PMIC for 1 functions. There are 1 channels on this power managment ic that can be found in a series. IC management is packaged as a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. During the reflow process, a peak temperature of 240 is specified for the package. IC management conducts in a 5V-voltage supply. The mount is attached to Surface Mount. There is a subcategory called Power Management Circuits for this power management. It has a total of 8 pins that are attached to IC management. This power management has 8 pins. A voltage (Vsup) that doesn't fall below 4.5V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. Power management recommends the Surface Mount mounting type. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. During operation, this power management system outputs Open Drain, Push-Pull. There is a 50μA supply current present in the power management. You can always use ADM1232, the base supervisor number, to search for similar PMICs of the manufacturer. A power supply of 5V watts is required for the operation of this power management. Voltage supervisor can work with a supply temperature of 500μA at the most. There are 1 inputs monitored at once on the power management.
ADM1232ARM-REEL7 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 4.5V
50μA operating supply current
ADM1232ARM-REEL7 Applications
There are a lot of Analog Devices Inc. ADM1232ARM-REEL7 Voltage Supervisors applications.
- Leakage protection
- Utility meter
- Detection of phase loss
- Cloud computing
- DVR
- Power distribution systems of operating room
- Smart meter
- Leakage current detection
- Transformer load monitoring equipment
- Consumer electronics
