ADM1232ARMZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 900mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADM1232 |
| Output | Open Drain, Push-Pull |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 50μA |
| Nominal Supply Current | 500μA |
| Power Dissipation | 900mW |
| Max Supply Current | 500μA |
| Adjustable Threshold | YES |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | Adjustable/Selectable |
| Reset Timeout | 250ms Minimum |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.74V |
| Threshold Voltage | +4.37/4.62V |
| Undervoltage Threshold | 4.25V |
| Overvoltage Threshold | 4.49V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 1 s |
| Height | 850μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADM1232ARMZ Overview
It is mounted through 8 terminals on the power management. Tube-packaging is used. In this IC power you will find 1 functions for you to refer to. This power managment ic consists of 1 channels, each of which can be used independently. Please refer to power management for 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) functions. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. IC management conducts in a 5V-voltage supply. Surface Mount mounts power management on the wall. A IC power such as this can be classified as a Power Management Circuits power management system. It has a total of 8 pins that are attached to IC management. There are 8 pins on the power managment ic. Supply voltage (Vsup) should be at least 4.5V for this power management. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. Surface Mount mounting is recommended. We recommend setting the supervisors to -40°C~85°C TA degrees. When this power management system is in operation, it produces an output voltage of Open Drain, Push-Pull. There is a supply current of 50μA for the power management. A similar IC managements number of the manufacturer can always be found by using ADM1232, the base power ics number. It is necessary to have 5V volts of power in order for this voltage supervisor to operate. The power management can work with a maximum supply temperature of 500μA. In total, there are 1 inputs on the power management that can be monitored.
ADM1232ARMZ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 4.5V
50μA operating supply current
ADM1232ARMZ Applications
There are a lot of Analog Devices Inc. ADM1232ARMZ Voltage Supervisors applications.
- Medical-specific insulation monitor
- Dash board
- Smartphones
- Power distribution systems of ICU
- Magnetic resonance imaging
- Military communications
- Low voltage/high power - AI, GPU
- Embedded computing
- Set top box
- Cloud computing
