ADM1232ARMZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 900mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADM1232 |
| Output | Open Drain, Push-Pull |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 50μA |
| Nominal Supply Current | 500μA |
| Power Dissipation | 900mW |
| Max Supply Current | 500μA |
| Adjustable Threshold | YES |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | Adjustable/Selectable |
| Reset Timeout | 250ms Minimum |
| Threshold Voltage | +4.37/4.62V |
| Undervoltage Threshold | 4.25V |
| Overvoltage Threshold | 4.49V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 1 s |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADM1232ARMZ-REEL7 Overview
Power management is mounted through 8 terminals. In terms of packaging, power management follows the Tape & Reel (TR) model. There are 1 functions included in this PMIC so that you can refer to them. It is possible to find on this power management a series of 1 channels. Please find attached 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) functions for your reference in this IC power. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. The package peak reflow temperature is specified to be 260. IC management conducts at a voltage of 5V. The power management is mounted by Surface Mount. There is a subcategory called Power Management Circuits for this power management. Taking into account all of the pins, this power management has a total of 8. 8 pins make up the power management. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 4.5V, which is the minimum supply voltage that should be applied. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The recommended mounting type is Surface Mount. The temperature of the supervisors should be set to this range: -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Open Drain, Push-Pull. The supervisor's supply current is specified to 50μA. It is always advisable to use ADM1232, the base supervisor number, when searching for similar PMICs from the manufacturer. The voltage supervisor requires a power source of 5V volts in order to work correctly. A maximum supply temperature of 500μA can be used with this power management. It is possible to monitor 1 inputs at the same time on the power management as a whole.
ADM1232ARMZ-REEL7 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 4.5V
50μA operating supply current
ADM1232ARMZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADM1232ARMZ-REEL7 Voltage Supervisors applications.
- Battery cars
- External alarm
- WiFi router
- Radio
- Microprocessor system
- Medical-specific isolation transformer
- DSP
- Embedded computing
- Power distribution systems of infant care room
- Satellite navigation
