ADM1232ARNZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 900μW |
| Technology | HYBRID |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADM1232 |
| Output | Open Drain, Push-Pull |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 50μA |
| Nominal Supply Current | 500μA |
| Power Dissipation | 900μW |
| Max Supply Current | 500μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | Adjustable/Selectable |
| Reset Timeout | 250ms Minimum |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.74V |
| Threshold Voltage | +4.37/4.62V |
| Undervoltage Threshold | 4.25V |
| Overvoltage Threshold | 4.49V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 1 s |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADM1232ARNZ Overview
There are 8 terminals on this power management that allow it to be mounted. Packaged in the form of a Tube, power management is easy to use. To assist you, this IC power includes 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. Please find attached 8-SOIC (0.154, 3.90mm Width) functions for your reference in this IC power. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. As specified in the package specification, the peak reflow temperature of the package is set at 260. There is a voltage supply of 5V for the PMIC chip, and the chip conducts at that voltage. The power management is mounted by Surface Mount. The power management system can be categorized as a Power Management Circuits chip. It has a total of 8 pins that are attached to IC management. There are 8 pins on the supervisor. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 4.5V, which is the minimum supply voltage that should be applied. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Surface Mount is the recommended mounting type. The temperature of the supervisors should be set to this range: -40°C~85°C TA. The output voltage of this power managment ic during operation is Open Drain, Push-Pull. There is a supply current of 50μA for the power management. If you want to search for similar IC managements of this manufacturer, you can always refer to ADM1232, which is the base power ics number. It is necessary to have 5V volts of power in order for this voltage supervisor to operate. The maximum supply temperature is 500μA. There are a total of 1 monitored inputs on the power management.
ADM1232ARNZ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 4.5V
50μA operating supply current
ADM1232ARNZ Applications
There are a lot of Analog Devices Inc. ADM1232ARNZ Voltage Supervisors applications.
- Electric heating appliances
- Telecommunications equipment
- emergency room
- Electrical fire monitoring system
- Digitally controlled LDO regulators circuit
- Analog circuit
- Consumer electronics
- Smartphones
- DVR
- Battery cars
