ADM1232ARWZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 900mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADM1232 |
| Output | Open Drain, Push-Pull |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 50μA |
| Nominal Supply Current | 500μA |
| Power Dissipation | 900mW |
| Max Supply Current | 500μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | Adjustable/Selectable |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 250ms Minimum |
| Threshold Voltage | +4.37/4.62V |
| Undervoltage Threshold | 4.25V |
| Overvoltage Threshold | 4.49V |
| Reset Delay Time | 1 s |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADM1232ARWZ-REEL7 Overview
There are 16 terminals connected to this power management, which makes it easy to mount. Tape & Reel (TR)-packaging is used. In this IC power you will find 1 functions for you to refer to. Depending on the power managment ic you are looking at, you can find a total of 1 channels. The purpose of this IC power is to provide you with a reference of 16-SOIC (0.295, 7.50mm Width) functions. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. Packages are specified to have an average peak reflow temperature of 260. There is a voltage supply of 5V for the PMIC chip, and the chip conducts at that voltage. During operation, the power ic is supplied with a voltage of 1. The power management is mounted by a Surface Mount-axis. Power Management Circuits is a subcategory of this PMIC chip. The total number of pins on this power management is 16. Power managment ic pin count is 16. Supply voltage (Vsup) should be at least 4.5V for this power management. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Surface Mount is the recommended mounting type. We recommend setting the supervisors to -40°C~85°C TA degrees. There is an output voltage of Open Drain, Push-Pull from this supervisor when it is operating. As far as the supply current of the power management is concerned, it is 50μA. If you want to search for similar IC managements of this manufacturer, you can always refer to ADM1232, which is the base power ics number. To operate this power management, you will need at least 5V volts of power. At the most, voltage supervisor can work with a supply temperature of 500μA. There are 2 elements to this supervisor, which can be used in a variety of applications.
ADM1232ARWZ-REEL7 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 4.5V
50μA operating supply current
ADM1232ARWZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADM1232ARWZ-REEL7 Voltage Supervisors applications.
- Rechargeable batteries
- Power communication system
- Household appliances
- Medical-specific insulation monitor
- Set top box
- Smart meter
- Dash board
- Low voltage/high power - AI, GPU
- Satellite navigation
- Stable power system
