ADM12914-1ARQZ-RL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Tin (Sn) |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADM12914 |
| Output | Open Drain or Open Collector |
| Pin Count | 16 |
| Power Supplies | 3.3V |
| Number of Channels | 4 |
| Max Supply Voltage | 6.8V |
| Min Supply Voltage | 2.3V |
| Operating Supply Current | 62μA |
| Nominal Supply Current | 62μA |
| Adjustable Threshold | YES |
| Watchdog Timer | No |
| Reset | Active Low |
| Number of Voltages Monitored | 4 |
| Reset Timeout | Adjustable/Selectable |
| Supply Current-Max (Isup) | 0.1mA |
| Height Seated (Max) | 1.65mm |
| Width | 3.91mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADM12914-1ARQZ-RL7 Overview
As you can see, this power management is mounted through 16 terminals. It is packaged with Tape & Reel (TR). For your reference, this IC power includes a list of 1 functions. On this supervisor, there is a series of 4 channels that can be found. Please find attached 16-SSOP (0.154, 3.90mm Width) functions for your reference in this IC power. There are a number of benefits that this PMIC has in common with other Multi-Voltage Supervisor manage ics. Packages are specified to have an average peak reflow temperature of 260. When 3.3V is applied to the power ic, it conducts. IC management is possible to find a succession of 4 voltages that have been checked. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. Power management has a total of 16 pins. 16 pins are present on the power management system. It is recommended that Vsup should not be less than 2.3V for this IC power. This IC power should be powered by no more than 6.8V volts of supply voltage (Vsup). Power management recommends the Surface Mount mounting type. It is recommended to set the supervisor's temperature to this range: -40°C~125°C TA. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. There is a supply current of 62μA for the power management. A similar IC managements number of the manufacturer can always be found by using ADM12914, the base power ics number. It requires 3.3V watts of power to operate this voltage supervisor.
ADM12914-1ARQZ-RL7 Features
Multi-Voltage Supervisor type
Minimum supply voltage of 2.3V
62μA operating supply current
ADM12914-1ARQZ-RL7 Applications
There are a lot of Analog Devices Inc. ADM12914-1ARQZ-RL7 Voltage Supervisors applications.
- Digitally controlled LDO regulators circuit
- Battery-powered equipment
- Medical-specific isolation transformer
- Electric heating appliances
- Leakage current detection
- Stable power system
- Military communications
- Automotive permanent magnet synchronous motors
- Network equipment
- Power distribution systems of ICU
