ADM1294-1BACPZ-RL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~105°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| HTS Code | 8542.39.00.01 |
| Subcategory | Power Management Circuits |
| Voltage - Supply | 2.95V~13V |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADM1294 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 13V |
| Power Supplies | -48V |
| Supply Voltage-Min (Vsup) | 2.95V |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 3.6mA |
| Supply Current-Max (Isup) | 3.3mA |
| Neg Supply Voltage-Nom (Vsup) | -48V |
| Meter Type | Single Phase |
| Voltage - I/O Low | 0.4V 0.8V 1.5V |
| Voltage - I/O High | 1.1V |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADM1294-1BACPZ-RL7 Overview
Packing in Tape & Reel (TR). It is packaged in the 16-WQFN Exposed Pad format. An example of its use as a Single Phase meter would be the following. The following version of Surface Mount is available. The operational temperature at -40°C~105°C has been increased. There is a 2.95V~13V power supply used in this device. Check out ADM1294 for more similar parts. It has a voltage of 0.4V 0.8V 1.5V for its low-level I/O ports in this PMIC. This device is capable of delivering voltages of 1.1V for high-level I/Os on its pins. Parts of the part are terminated with 16 wires. This is a powerful analog ANALOG CIRCUIT IC for PMICs. The user should be aware that in order for this device to operate, it requires a voltage of 2.95V or higher in order to function. The maximum voltage that goes to the device should be keep under 13V. An assembly of 16 pins is present. This is a 16 solution for logic gate applications. It comes with a Surface Mount device for easy mounting and dismounting. Specifically, this is a Power Management Circuits for specialized needs that needs to be taken care of. The maximum supply current is recommended to be set at 3.6mA in order to make sure the PMIC keeps running normally. It usually requires a -48V power supply to run the device. It's allowed to operate at a voltage no higher than 3.3mA.
ADM1294-1BACPZ-RL7 Features
Single Phase meter.
ANALOG CIRCUIT analog IC.
ADM1294-1BACPZ-RL7 Applications
There are a lot of Analog Devices Inc. ADM1294-1BACPZ-RL7 Energy Metering ICs applications.
- General Purpose Energy Measurement
- Real-Time Measurement of Input Power for AC/DC Supplies
- Base Station Power Distribution Systems
- Industrial Equipment
- Industrial Lighting Power Monitoring
- Intelligent Power Distribution Units
- Telecommunications and data communications equipment
- PCs/servers
- Power monitoring/power budgeting
- Power monitoring instruments
